Pydio on R7000 - "error loading pydio.min.js"

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
View previous topic :: View next topic  
Author Message
dave.computer
DD-WRT Novice


Joined: 08 Jul 2016
Posts: 3
PostPosted: Fri Jul 08, 2016 0:39    Post subject: Pydio on R7000 - "error loading pydio.min.js" Reply with quote
Hello,

I am trying to follow Kong's instructions for installing Pydio on my R7000. At step 6, the Pydio diagnostic tool reports warnings, but no errors. When I attempt to configure Pydio, a pop-up indicates:

Code:
error loading pydio.min.js?v=6.4.1:ProtoCompat is not defined

There is no further progress. None of the information I found on Pydio's forum could be applied to Lighttpd and DD-WRT. On this forum, all refferences to Pydio refer to Kong's instructions, and make it seem easy. I'm wondering what I've done wrong.

My router's status:

Code:
Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r30100M kongac (07/04/16)
Kernel Version: Linux 4.4.14 #116 SMP Mon Jul 4 22:13:30 CEST 2016 armv7l

My external drive disk info:

Code:
--- /dev/sda1
Block device, size 512 MiB (536870912 bytes)
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
Swap size 512.0 MiB (536862720 bytes, 131070 pages of 4 KiB)
/dev/sda1 mounted to swap
--- /dev/sda2
Block device, size 4.548 TiB (5000442937344 bytes)
Ext4 file system
Volume name "jffs"
UUID F3E3CEA7-0232-40CA-975E-5D712012DCEE (DCE, v4)
Last mounted at "/jffs"
Volume size 4.548 TiB (5000442937344 bytes, 1220811264 blocks of 4 KiB)
/dev/sda2 mounted to /jffs

Any help would be appreciated.
Back to top View user's profile Send private message
Sponsor
Nonikoff
DD-WRT Novice


Joined: 18 Mar 2016
Posts: 30
PostPosted: Fri Jul 08, 2016 14:36    Post subject: Reply with quote
Empty cache of your browser, then test if \plugins\gui.ajax\res\js\pydio.min.js is reachable.
If yes/no re-upload pydio.min.js again, it can be broken
What version of Pydio you are using?
Back to top View user's profile Send private message
dave.computer
DD-WRT Novice


Joined: 08 Jul 2016
Posts: 3
PostPosted: Sun Jul 10, 2016 16:13    Post subject: Reply with quote
Thanks for your reply!

I emptied my browser cache. I'm not sure what you mean by the file being "reachable". It is where it is supposed to be:

Code:
root@1069_router:~# ls -la /jffs/www/plugins/gui.ajax/res/js/
drwxr-xr-x    6 root     root          4096 Jul 10 08:20 .
drwxr-xr-x    7 root     root          4096 Jul 10 08:20 ..
-rw-r--r--    1 root     root        345747 Apr 11 14:37 ajaxplorer.js
-rw-r--r--    1 root     root        150248 Apr 11 14:37 ajaxplorer_boot.js
-rw-r--r--    1 root     root           295 Apr 11 14:37 ajaxplorer_boot_list.txt
-rw-r--r--    1 root     root           670 Apr 11 14:37 ajaxplorer_core.txt
-rw-r--r--    1 root     root          2467 Apr 11 14:37 ajaxplorer_ui.txt
drwxr-xr-x    6 root     root          4096 Jul 10 08:20 core
drwxr-xr-x    6 root     root          4096 Jul 10 08:20 es6
-rw-r--r--    1 root     root          2369 Apr 11 14:37 index.php
-rw-r--r--    1 root     root        100978 Apr 11 14:37 jquery_backbone-min.js
-rw-r--r--    1 root     root        752275 Apr 11 14:39 pydio.min.js
drwxr-xr-x    4 root     root          4096 Jul 10 08:20 ui
drwxr-xr-x   12 root     root          4096 Jul 10 08:20 vendor


The version of Pydio I'm using is 6.4.1, which I obtained from Sourceforge, by downloading pydio-core-6.4.1, and unzipping it to /jffs/www.

I tried deleting pydio.min.js and transfering it again from the unzipped folder on my PC. Just for good measure, I rebooted the router. The error is still there.
Back to top View user's profile Send private message
dave.computer
DD-WRT Novice


Joined: 08 Jul 2016
Posts: 3
PostPosted: Sun Jul 10, 2016 16:19    Post subject: Reply with quote
I tried using older versions of Pydio, specifically 6.0.8 and 5.2.0. Both of them pass the diagnostic tool, but fail to load Pydio's main page.

For some reason I can't post to the Pydio forum. I'm waiting until Monday to hear back from someone at Pydio about that.
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum