FireBloodPhoeniX DD-WRT Novice
Joined: 15 Mar 2012 Posts: 3
|
Posted: Thu Mar 15, 2012 6:10 Post subject: WR1043ND ---> K3765 WAN Connection |
|
Hello
Its my first time here ,First time using DD-WRD ,total noob in linex
im trying to get internet using my 3g with the router
But it seems im doomed to fail
--------------------------------------------------------------------------------
Router: WR1043ND v1.8 , 8MB Flash, 32MB RAM, Atheros AR9132@400MHz
3G device: HUAWEI K3765
DD-WRD ver: DD-WRD v24-SP2 (08/07/10) std
--------------------------------------------------------------------------------
I read that using putty on your 3g's com port an shwitshing to modem only mode will help
Thare is 3 ports witsh one?(Windows 7 32bit)
Vodafone mobile broudband moudem (HUAWEI)-COM13-->connects but cant type anything
Vodafone mobile broudband diagnostics port (HUAWEI)-COM12-->connects but cant type anything
Vodafone mobile broudband Secondery port moudem (HUAWEI)-COM14-->connects gives some info
using putty on COM14:(CAPS/NOCAPS)
AT^U2DIAG=0-->COMMAND NOT SUPPORT
at^setport="A1,A2;1,2,3,7"-->COMMAND NOT SUPPORT
--------------------------------------------------------------------------------
DSMSG:
<5>[ 0.000000] Linux version 2.6.34.9-svn17089 (root@dd-wrt) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #6044 Tue Jun 14 12:34:17 CEST 2011
<4>[ 0.000000] flash_size passed from bootloader = 8
<6>[ 0.000000] bootconsole [early0] enabled
<6>[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
<6>[ 0.000000] booting platform Atheros AR9132 rev 2 (0xb9)
<6>[ 0.000000] Determined physical RAM map:
<6>[ 0.000000] memory: 02000000 @ 00000000 (usable)
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] Normal 0x00000000 -> 0x00002000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[1] active PFN ranges
<4>[ 0.000000] 0: 0x00000000 -> 0x00002000
<7>[ 0.000000] On node 0 totalpages: 8192
<7>[ 0.000000] free_area_init_node: node 0, pgdat 802511a0, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 64 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<6>[ 0.000000] Writing ErrCtl register=00000000
<6>[ 0.000000] Readback ErrCtl register=00000000
<6>[ 0.000000] Memory: 29680k/32768k available (2007k kernel code, 3088k reserved, 358k data, 140k init, 0k highmem)
<6>[ 0.000000] NR_IRQS:128
<0>[ 0.000000] irq init done
<4>[ 0.000000] plat_time_init: plat time init done
<6>[ 0.000000] Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
<4>[ 0.240000] Mount-cache hash table entries: 512
<6>[ 0.240000] NET: Registered protocol family 16
<4>[ 0.260000] bio: create slab at 0
<6>[ 0.260000] Switching to clocksource MIPS
<6>[ 0.270000] NET: Registered protocol family 2
<6>[ 0.270000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.280000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>[ 0.290000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.290000] TCP: Hash tables configured (established 1024 bind 1024)
<6>[ 0.300000] TCP reno registered
<6>[ 0.300000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.310000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.310000] NET: Registered protocol family 1
<5>[ 0.320000] gpio_proc: module loaded and /proc/gpio/ created
<5>[ 0.320000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<4>[ 0.330000] AR7100 GPIOC major 0
<5>[ 0.330000] init_vdso successfull
<6>[ 0.340000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[ 0.340000] msgmni has been set to 57
<6>[ 0.350000] io scheduler noop registered
<6>[ 0.350000] io scheduler deadline registered (default)
<6>[ 0.360000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 0.370000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
<6>[ 0.370000] console [ttyS0] enabled, bootconsole disabled
<0>[ 0.390000] guessed flashsize = 8M
<0>[ 0.390000] scanning for root partition
<0>[ 0.390000] tplink uboot detected
<0>[ 0.400000] bootloader size = 20000
<0>[ 0.400000]
<0>[ 0.400000] found squashfs at 160000
<5>[ 0.410000] Creating 8 MTD partitions on "ar7100-nor0":
<5>[ 0.410000] 0x000000000000-0x000000020000 : "RedBoot"
<5>[ 0.420000] 0x000000020000-0x0000007e0000 : "linux"
<5>[ 0.430000] 0x000000160000-0x0000007d0000 : "rootfs"
<5>[ 0.430000] mtd: partition "rootfs" set to be root filesystem
<5>[ 0.440000] 0x0000007d0000-0x0000007e0000 : "ddwrt"
<5>[ 0.440000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[ 0.450000] 0x0000007f0000-0x000000800000 : "FIS directory"
<5>[ 0.460000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[ 0.460000] 0x000000000000-0x000000800000 : "fullflash"
<6>[ 0.470000] PPP generic driver version 2.4.2
<6>[ 0.470000] PPP Deflate Compression module registered
<6>[ 0.480000] PPP BSD Compression module registered
<6>[ 0.480000] PPP MPPE Compression module registered
<6>[ 0.490000] NET: Registered protocol family 24
<6>[ 0.490000] PPPoL2TP kernel driver, V1.0
<6>[ 0.500000] IMQ driver loaded successfully.
<6>[ 0.500000] Hooking IMQ before NAT on PREROUTING.
<6>[ 0.510000] Hooking IMQ after NAT on POSTROUTING.
<6>[ 0.510000] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.520000] tun: (C) 1999-2004 Max Krasnyansky
<6>[ 0.520000] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
<4>[ 0.530000] u32 classifier
<4>[ 0.540000] input device check on
<4>[ 0.540000] Actions configured
<4>[ 0.540000] Netfilter messages via NETLINK v0.30.
<4>[ 0.550000] nf_conntrack version 0.5.0 (463 buckets, 1852 max)
<4>[ 0.550000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 0.560000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 0.570000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<4>[ 0.580000] nf_conntrack_rtsp v0.6.21 loading
<4>[ 0.580000] nf_nat_rtsp v0.6.21 loading
<6>[ 0.590000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.590000] IPP2P v0.8.2 loading
<6>[ 0.590000] TCP westwood registered
<6>[ 0.600000] TCP hybla registered
<6>[ 0.600000] TCP vegas registered
<6>[ 0.600000] NET: Registered protocol family 17
<6>[ 0.610000] 802.1Q VLAN Support v1.8 Ben Greear
<6>[ 0.620000] All bugs added by David S. Miller
<4>[ 0.650000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[ 0.660000] Freeing unused kernel memory: 140k freed
<5>[ 2.830000] Realtek RTL8366RB ethernet switch driver version 0.2.2
<6>[ 2.840000] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
<6>[ 2.840000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
<6>[ 2.870000] rtl8366rb: probed
<4>[ 2.890000] ag7100_mod: module license 'unspecified' taints kernel.
<4>[ 2.890000] Disabling lock debugging due to kernel taint
<6>[ 2.910000] ag7100_mii: probed
<0>[ 2.910000] phymap is null
<6>[ 3.340000] usbcore: registered new interface driver usbfs
<6>[ 3.340000] usbcore: registered new interface driver hub
<6>[ 3.350000] usbcore: registered new device driver usb
<6>[ 3.440000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 3.470000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller
<6>[ 3.480000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1
<6>[ 3.520000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
<6>[ 3.540000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00
<6>[ 3.540000] hub 1-0:1.0: USB hub found
<6>[ 3.550000] hub 1-0:1.0: 1 port detected
<5>[ 3.860000] SCSI subsystem initialized
<6>[ 4.000000] usb 1-1: new high speed USB device using ar71xx-ehci and address 2
<6>[ 4.210000] Initializing USB Mass Storage driver...
<6>[ 4.220000] usbcore: registered new interface driver usb-storage
<6>[ 4.220000] USB Mass Storage support registered.
<6>[ 4.270000] scsi0 : usb-storage 1-1:1.0
<4>[ 4.370000] Writing 4
<6>[ 4.670000] ath_mimo_hal: 0.9.17.1 (AR5416, REGOPS_FUNC)
<6>[ 5.130000] ath_ahb: 0.9.4.5 (Atheros/multi-bss)
<6>[ 5.130000] wlan: 0.8.4.2 (Atheros/multi-bss)
<6>[ 5.140000] wlan: mac acl policy registered
<6>[ 5.140000] ath_rate_atheros: Version 2.0.1
<6>[ 5.140000] Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
<4>[ 5.150000] IRQ 2/wifi%d: IRQF_DISABLED is not guaranteed on shared IRQs
<6>[ 5.380000] ar5416CheckEepromDef: Read Magic = 0xFFFF
<6>[ 5.390000] EEPROM being read from flash @0xbfff1000
<6>[ 5.390000] need_swap = False.
<6>[ 5.400000] Howl Revision ID 0xb9
<4>[ 5.400000] DFS min filter rssiThresh = 18
<4>[ 5.410000] DFS max pulse dur = 131 ticks
<4>[ 5.410000] 1Mbps 2Mbps 5.5Mbps 11Mbps
<4>[ 5.420000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 5.430000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 5.440000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 5.440000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 5.450000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 5.450000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 5.460000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 5.470000] wifi0: mac 20.0 phy 10.2 radio 13.0
<4>[ 5.470000] wifi0: Use hw queue 1 for WME_AC_BE traffic
<4>[ 5.480000] wifi0: Use hw queue 0 for WME_AC_BK traffic
<4>[ 5.480000] wifi0: Use hw queue 2 for WME_AC_VI traffic
<4>[ 5.490000] wifi0: Use hw queue 3 for WME_AC_VO traffic
<4>[ 5.490000] wifi0: Use hw queue 8 for CAB traffic
<4>[ 5.500000] wifi0: Use hw queue 9 for beacons
<4>[ 5.500000] wifi0: Use hw queue 7 for UAPSD
<6>[ 5.510000] wifi0: Atheros AR9100 WiSoC: mem=0xb80c0000, irq=2
<5>[ 5.510000] scsi 0:0:0:0: CD-ROM Vodafone CD ROM (Huawei) 2.31 PQ: 0 ANSI: 2
<4>[ 5.530000] sr0: scsi-1 drive
<6>[ 5.530000] Uniform CD-ROM driver Revision: 3.20
<7>[ 5.540000] sr 0:0:0:0: Attached scsi CD-ROM sr0
<6>[ 5.820000] usbcore: registered new interface driver usblp
<6>[ 7.570000] device br0 entered promiscuous mode
<6>[ 7.630000] device vlan1 entered promiscuous mode
<6>[ 7.630000] device eth0 entered promiscuous mode
<6>[ 7.640000] br0: port 1(vlan1) entering learning state
<6>[ 7.640000] device br0 left promiscuous mode
<6>[ 7.650000] device br0 entered promiscuous mode
<6>[ 7.660000] device br0 left promiscuous mode
<6>[ 7.660000] device br0 entered promiscuous mode
<4>[ 7.800000]
<4>[ 7.800000] ath_numswbaperbc = 8(1)adj=76800
<6>[ 8.640000] br0: port 1(vlan1) entering forwarding state
<6>[ 11.250000] device ath0 entered promiscuous mode
<6>[ 11.260000] br0: port 2(ath0) entering learning state
<6>[ 11.440000] bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
<6>[ 11.450000] bonding: MII link monitoring set to 100 ms
<6>[ 12.260000] br0: port 2(ath0) entering forwarding state
<6>[ 12.930000] usbcore: registered new interface driver usbserial
<6>[ 12.940000] USB Serial support registered for generic
<6>[ 12.940000] usbcore: registered new interface driver usbserial_generic
<6>[ 12.950000] usbserial: USB Serial Driver core
<6>[ 13.220000] USB Serial support registered for GSM modem (1-port)
<6>[ 13.230000] usbcore: registered new interface driver option
<6>[ 13.240000] option: v0.7.2:USB Driver for GSM modems
<4>[ 14.870000] Freeing node: f4:ec:38:fc:0b:d4
<4>[ 14.880000] ic->ic_cwm.cw_width :0, ic->ic_cwm.cw_extoffset: 0
<6>[ 16.840000] etherip: Ethernet over IPv4 tunneling driver
lsusb -v:
/bin/sh: eval: line 1: lsusb: not found
cat /sys/kernel/debug/usb/devices:
(no report)
cat /proc/bus/usb/devices:
(no report)
comgt -d /dev/usb/tts/0 info output:
/bin/sh: can't open /dev/usb/tts/0: no such file
##### Wireless WAN Modem Configuration #####
Can't open device /dev/usb/tts/0.
--------------------------------------------------------------------------------
i alsow tryed :
1. Setup everything in the setup section and use auto on network selection and no pin code. Dial command #99
2. setup a startup script to include the following
echo "12d1 1506" > /sys/bus/usb-serial/drivers/option1/new_id
sleep 20
usb_modeswitch -v 12d1 -p 1505 -V 12d1 -P 1506 -M "55534243123456780000000000000011062000000100000000000000000000" -n 1 -W
sleep 30
nvram set 3gdata=/dev/usb/tts/0
Then it should get online when you restart the router given that the apn are set correctly.
3. cron (if you get disconnected)
* * * * * [ "`/usr/sbin/nvram get 3gdata`" == "/dev/usb/tts/2" ] && /usr/sbin/nvram set 3gdata=/dev/usb/tts/0
--------------------------------------------------------------------------------
please help!! |
|