router possibly bricked.

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
jamescbarrow
DD-WRT Novice


Joined: 29 Feb 2012
Posts: 28

PostPosted: Sat Mar 03, 2012 3:56    Post subject: router possibly bricked. Reply with quote
hello i have a wrt54gs that i think is bricked, when i power it on, the power light stays on and which ever plug i have the eather net in will light up, all the ports light up, and the dmz light is barely lit. when i enter the ip into the browser, it says page can not be found. i have tried pinging the router and it came back timed out, or host unreachable timed out, note it was like this when i got it.

it is a wrt54gs version 5.0
Sponsor
Murrkf
DD-WRT Guru


Joined: 22 Sep 2008
Posts: 12675

PostPosted: Sat Mar 03, 2012 4:44    Post subject: Reply with quote
In your last thread, you asked for advice, and were given it by Slobodon, and then you ignored it and posted eight more times in a few hours. I will lock that thread and repeat the same advice:

Read the wiki and the broadcom forum announcements. This is not optional and don't post back until you have finished reading all four announcements.

_________________
SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
jamescbarrow
DD-WRT Novice


Joined: 29 Feb 2012
Posts: 28

PostPosted: Sat Mar 03, 2012 18:31    Post subject: Reply with quote
well i have read the peacock thread, and done every thing short of a jtag,when i power the router up the power light comes on flashing, along with the lan lights coming on and staying on for 5 seconds, then go off power light continuesa steady flashing,
Murrkf
DD-WRT Guru


Joined: 22 Sep 2008
Posts: 12675

PostPosted: Sat Mar 03, 2012 18:54    Post subject: Reply with quote
The steps in note 6 of the peacock are sequential and present all reasonable options.
_________________
SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
jamescbarrow
DD-WRT Novice


Joined: 29 Feb 2012
Posts: 28

PostPosted: Sat Mar 03, 2012 19:32    Post subject: Reply with quote
murrk this is the reponse when i ran a ping on the ip, i tried several.



Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\james>-t 192.168.1.1
'-t' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\james>-t 192.168.1.10
'-t' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\james>-t 192.168.1.2
'-t' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\james>-t 192.168.10.1
'-t' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\james>
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Sat Mar 03, 2012 19:45    Post subject: Reply with quote
C:\Users\james>ping -t 192.168.1.1
_________________
[Moderator Deleted] Shocked
jamescbarrow
DD-WRT Novice


Joined: 29 Feb 2012
Posts: 28

PostPosted: Sat Mar 03, 2012 19:54    Post subject: Reply with quote
barryware thanks for giving me the proper command to get a response, here is what im geting, this is with and with out a 30/30/30 reset


Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\james>ping -t 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
jamescbarrow
DD-WRT Novice


Joined: 29 Feb 2012
Posts: 28

PostPosted: Sat Mar 03, 2012 20:31    Post subject: Reply with quote
ok critical update.... got it to take a comp of the stock firmware, runing the ftp with the ping test running.
jamescbarrow
DD-WRT Novice


Joined: 29 Feb 2012
Posts: 28

PostPosted: Sat Mar 03, 2012 21:05    Post subject: Reply with quote
thanks for the help every one i was able to get a succsessfull dd-wrt to load i was able to enter the ip and get the dd-wrt page to load.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum