NEW BUILD 03-19-12-r18777

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, ... 13, 14, 15  Next
Author Message
fabkey
DD-WRT Novice


Joined: 05 Dec 2011
Posts: 4

PostPosted: Tue Mar 20, 2012 11:25    Post subject: Reply with quote
Buffalo WBMR-HP-G300H with lasr version, lan dont work
Sponsor
simoon78
DD-WRT Novice


Joined: 30 May 2011
Posts: 4

PostPosted: Tue Mar 20, 2012 12:27    Post subject: Reply with quote
WNDR3700 v2 - WIFI finally working.

Code:

<6>[    7.070000] cfg80211: Calling CRDA to update world regulatory domain
<6>[    7.420000] cfg80211: World regulatory domain updated:
<6>[    7.420000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[    7.430000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    7.440000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[    7.450000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[    7.450000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    7.460000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<7>[    7.600000] ath: EEPROM regdomain: 0x0
<7>[    7.600000] ath: EEPROM indicates default country code should be used
<7>[    7.600000] ath: doing EEPROM country->regdmn map search
<7>[    7.600000] ath: country maps to regdmn code: 0x3a
<7>[    7.600000] ath: Country alpha2 being used: US
<7>[    7.600000] ath: Regpair used: 0x3a
<7>[    7.620000] Registered led device: ath9k-phy0
<7>[    7.640000] ath: EEPROM regdomain: 0x0
<7>[    7.640000] ath: EEPROM indicates default country code should be used
<7>[    7.640000] ath: doing EEPROM country->regdmn map search
<7>[    7.640000] ath: country maps to regdmn code: 0x3a
<7>[    7.640000] ath: Country alpha2 being used: US
<7>[    7.640000] ath: Regpair used: 0x3a
<7>[    7.690000] Registered led device: ath9k-phy1
<6>[    7.700000] cfg80211: Calling CRDA for country: US
<6>[    7.730000] cfg80211: Regulatory domain changed to country: US
<6>[    7.730000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[    7.740000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[    7.750000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[    7.760000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    7.770000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    7.770000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    7.780000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[   12.410000] cfg80211: Calling CRDA to update world regulatory domain
<6>[   12.430000] cfg80211: World regulatory domain updated:
<6>[   12.440000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[   12.450000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   12.460000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[   12.460000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[   12.470000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   12.480000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   12.490000] cfg80211: Calling CRDA for country: PL
<6>[   12.500000] cfg80211: Regulatory domain changed to country: PL
<6>[   12.510000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[   12.520000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
<6>[   12.520000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
<6>[   12.530000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
<6>[   12.540000] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
<6>[   16.920000] device ath0 entered promiscuous mode
<6>[   16.920000] br0: port 2(ath0) entering listening state
<6>[   16.930000] br0: port 2(ath0) entering listening state
<6>[   18.930000] br0: port 2(ath0) entering learning state
<6>[   20.930000] br0: port 2(ath0) entering forwarding state

[/img]
Tank_Killer
DD-WRT User


Joined: 09 Mar 2012
Posts: 51

PostPosted: Tue Mar 20, 2012 13:11    Post subject: Reply with quote
Very happy to see dev has kicked into high gear, almost ready to put this on my wndr3700 v1 (and donate when stable)

Very Happy
crystalfox
DD-WRT Novice


Joined: 18 Mar 2012
Posts: 4

PostPosted: Tue Mar 20, 2012 14:16    Post subject: Reply with quote
DIR-825 B1 working fine, only bandwidth monitor for Ath0 and Ath1 is not working.
rmaeder
DD-WRT Novice


Joined: 29 Dec 2010
Posts: 9
Location: Wollerau, Switzerland

PostPosted: Tue Mar 20, 2012 15:45    Post subject: problems on a Netgear WNDR3700 Reply with quote
Just upgraded to 18777 from 17201. Two issues:

- the bandwidth graph for the ath1 interface does not show any traffic. I exercised the connection with around 80Mbps, but the graph stayed flat. ath0 is OK.

- when the channel is set to 'auto', it doesn't set up the AP for the ath1 radio, it stays 'not associated' rather than becoming 'Master'. After manually choosing a channel, it brought up the AP.

Roman
gunny2k9
DD-WRT Novice


Joined: 08 Nov 2009
Posts: 29

PostPosted: Tue Mar 20, 2012 15:52    Post subject: Reply with quote
WZR-HP-G300NH now running 18777 as a client bridge routed Smile

lol taken all day to get ddwrt back after a brick ...long winded had to flash default buffalo, went to ddrt and brcked again so tried many different builds ...then went to gargoyle and back to default buffalo and then to ddwrt and now running ..

very strange but hey working !!!
murali_v_2000
DD-WRT Novice


Joined: 07 May 2011
Posts: 3

PostPosted: Tue Mar 20, 2012 16:50    Post subject: DIR615c1 and TrendnetTEW632BRP - Wifi broken Reply with quote
tatsuya46 wrote:
Supposedly fixed QoS, DIR-600/615 fixes.. will try soon.


In DIR615c1 and TrendnetTEW632BRP - Wifi broken in both for the last several builds (incl 18777). Because of that I am afraid to try it on my main router Buffalo WZR-HP-AG300H. Can someone pls confirm if the TX power scripts work on WZR-HP-AG300H with this build ?
revaz
DD-WRT Novice


Joined: 19 Mar 2012
Posts: 3

PostPosted: Tue Mar 20, 2012 16:57    Post subject: Reply with quote
dir-615 E4 All works fine, but not show Wan bandwaight too.
Don't matter for me, wireless interface is shown.

Sorry for my English)
emedlin
DD-WRT User


Joined: 03 Mar 2008
Posts: 53

PostPosted: Tue Mar 20, 2012 19:00    Post subject: Re: DIR615c1 and TrendnetTEW632BRP - Wifi broken Reply with quote
murali_v_2000 wrote:

In DIR615c1 and TrendnetTEW632BRP - Wifi broken in both for the last several builds (incl 18777).


How is the wifi broken?. I tried 18024 on my tew-652brp and the radio shows up as off. I was hoping this version would fix it.
eweri
DD-WRT User


Joined: 29 Dec 2007
Posts: 58

PostPosted: Tue Mar 20, 2012 19:57    Post subject: WNDR3700V2 works with tftp Reply with quote
Hello!

I tried to flash with web flash image,just getting a nice illuminated brick. Sad
Tried hardreset and everything to no avail.

Had to flash via tftp to get it back to work but now this beast has WLAN back again.
No release since 17201 worked with my WNDR3700 V2 but now with 18777 I am a happy guy Smile

running dhcpd, openvpn into my company network (via special script not via Web-GUI), IPv6 with Hurricane-Tunnel.
Everything feels faster and my openvpn-tunnel works really fast, with 17201 the openvpn-tunnel worked in one direction only, now it works in both directions.

Tomorrow I am going to test pptpd.

Really really a big step forward. Thanks to all developers Smile

BTW my good old Asus WL500-W is running 18777, too (just as AP)

Bye,
eweri
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Tue Mar 20, 2012 20:03    Post subject: Re: WNDR3700V2 works with tftp Reply with quote
eweri wrote:
Hello!

I tried to flash with web flash image,just getting a nice illuminated brick. Sad
Tried hardreset and everything to no avail.

Had to flash via tftp to get it back to work but now this beast has WLAN back again.
No release since 17201 worked with my WNDR3700 V2 but now with 18777 I am a happy guy Smile

running dhcpd, openvpn into my company network (via special script not via Web-GUI), IPv6 with Hurricane-Tunnel.
Everything feels faster and my openvpn-tunnel works really fast, with 17201 the openvpn-tunnel worked in one direction only, now it works in both directions.

Tomorrow I am going to test pptpd.

Really really a big step forward. Thanks to all developers Smile

BTW my good old Asus WL500-W is running 18777, too (just as AP)

Bye,
eweri


PPTP works just fine, I use it.

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55797 std
[QUALCOMM] DIR-862L --------------------------------> r55797 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

HipHopBlond
DD-WRT Novice


Joined: 26 Nov 2011
Posts: 42
Location: Sofia, Bulgaria

PostPosted: Tue Mar 20, 2012 23:10    Post subject: TL-WR741NDv4 SUCCESS! Reply with quote
Oh my god, thank you so much, I've been waiting so long for this... finally I'm back on track with DD-WRT, the router is performing awesome, I still can't believe it's finally out, Surprised Thank you so much devs, contributors, donors and so on... I've successfully reverted with the web flash image from stock to DD-WRT. It was very laggy in the beginning and I had to make a few hard resets but after 10 minutes of use it got use to the new firmware and not a single bug since then! Just finished setting everything up now making backup and going to bed :R Thank you so much again, love you all :*

The flash was successful and the router is working flawlessly, this is the real deal Cool TL-WR741NDv4
omiez
DD-WRT User


Joined: 30 Sep 2011
Posts: 96

PostPosted: Tue Mar 20, 2012 23:52    Post subject: Reply with quote
Anyone flashed TL-WR841ND V7 that can tell me if this version works on his router?

Like lights of Lan,Wan and Wireless service running without problem.

Thanks

_________________
RT v24-sp2 (07/20/12) std - build 19519
TP-LINK TL-WDR4300 Open-Wrt Attitude Adjustment 12.09 Final
TP-LINK WR841ND V7 Open-Wrt Attitude Adjustment 12.09 Final
garson
DD-WRT Novice


Joined: 20 Mar 2012
Posts: 6

PostPosted: Wed Mar 21, 2012 1:25    Post subject: Reply with quote
omiez wrote:
Anyone flashed TL-WR841ND V7 that can tell me if this version works on his router?

Like lights of Lan,Wan and Wireless service running without problem.

Thanks

This version works on TL-WR841N V7.2 but no lights for LAN,WiFi and WAN.
out of rules
DD-WRT Novice


Joined: 26 Nov 2010
Posts: 30

PostPosted: Wed Mar 21, 2012 1:56    Post subject: Reply with quote
TP-Link 1043ND v1.8
OpenVPN client has not default gateway when connect to OpenVPN server.

VPN Log:
Quote:
SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)
PUSH: Received control message: 'PUSH_REPLY dhcp-option DNS *some_ip* dhcp-option DNS *some_ip* route-gateway 10.7.0.1 redirect-gateway redirect-gateway ifconfig 10.7.0.6 255.255.255.0'
OPTIONS IMPORT: --ifconfig/up options modified
OPTIONS IMPORT: route options modified
OPTIONS IMPORT: route-related options modified
NOTE: --mute triggered...
1 variation(s) on previous 5 message(s) suppressed by --mute
I TUN/TAP device tap1 opened
TUN/TAP TX queue length set to 100
/sbin/ifconfig tap1 10.7.0.6 netmask 255.255.255.0 mtu 1500 broadcast 10.7.0.255
/sbin/route add -net *vpn_server* netmask 255.255.255.255 gw 123.123.123.123
/sbin/route del -net 0.0.0.0 netmask 0.0.0.0
/sbin/route add -net 0.0.0.0 netmask 0.0.0.0 gw 10.7.0.1
Initialization Sequence Completed


Route output:

Quote:
route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 123.123.123.123 0.0.0.0 UG 0
10.7.0.0 * 255.255.255.0 U 0 0 0 tap1
Goto page Previous  1, 2, 3, ... 13, 14, 15  Next Display posts from previous:    Page 2 of 15
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum