Another one bug appeared. Computers connected by LAN cannot reach each other. They cannot even ping each other, while they can ping router and router can ping them. LAN computers can connect to Wi-Fi clients and Wi-Fi clients see all computers connected on LAN. Rolled back to 18024 fixes the issue.
I don't have that problem, TP-Link 841N.
I think you using Buffalo Router, right?
I(we) have same problem. I'm using Buffalo WHR-G300N v2.
after brainslayer fixed the lan switch issue can anyone please build a firmware of the current version for the wbmr-hp-g300h?
This is the second time in a couple of days you have asked for this, sorry but the devs compile when they feel the builds are ready, there is no ETA's given on when builds are compiled. So you will just have to be patient...
And requests such as these shouldn't be in a build thread, build threads are to discuss success or problems with the particular build of its labeling, not for 'new build' requests.
I'll wait!
Anyway, How can I check new build? Is there RSS Feeds available?
its only stable on main channels 1,6,11 with 20 mhz width.
edit: 40 mhz with channel 6 + lower control channel stable, too with some few signal drops
edit2: looks like NG-Mixed has to be used instead N-Only. client cannot connect in N-Only and NG-Mixed makes Wireless Signal stable without drops in 40mhz.
Is anyone surprised that 4 years later there is not a new stable final build out? Not critizing DD-WRT's team at all because there are so many new routers coming out everyday and supporting them and bug testing each and everyone of them is very difficult.
On my router Buffalo WZR-HP-ag300n build 18777 does not work with the LED on port wan.Ho found instead an improvement over your Internet experience much smoother ..... _________________ Buffalo WZR-HP-AG300H DD-WRT v24-sp2 (03/19/12) std - build 18777 + modem Digicom combo cx + Nas Synology DS-209 da 2 T + LG DP1W+ APC Back-UPS RS-Power Saving Back-UPS Pro 550 + switch Zyxel Gs105B + http://forum.emulesecurity.net/topic.asp?TOPIC_ID=3441
Posted: Fri May 04, 2012 15:58 Post subject: Tp link wr1043nd
My wireless bridge on new firmware, drops internet connection. Both primary and secondary router are bridged and both web gui can be accessed, but no internet from the second router. The dhcp from first router is passing through to devices connected to second device. This and usb mini dlna are my primary requirements anyone know of a previous version where these were both stable.
Joined: 01 Jun 2011 Posts: 44 Location: Netherlands
Posted: Sat May 05, 2012 17:02 Post subject: IPv6
I enabled IPv6 today and was quite surprised that all the necessary binaries were included!
It's working great after some adjustments to a script from the wiki.
One thing that is a bit weird with this build is that when I've set wireless to dynamic or turbo it's very hard to get an internet connection after a reboot. _________________ Using: WZR-HP-G300NH
Just to have registered: I came from r17201 and firmware update form web GUI not worked.
I had to upgrade via TFTP, but now this build is working nice.