lmolden DD-WRT Novice
Joined: 16 Apr 2012 Posts: 1
|
Posted: Mon Apr 16, 2012 16:04 Post subject: Virtual interface - multiple SSID WLAN |
|
Hardware: Buffalo WZR-HP-450H
Firmware: DD WRT build 18795
Task: Establish open public WLAN not being able access computer on private WLAN - used for neighbor.
I set up all in accordance with the tutorials in here and at youtube, for example
http://www.youtube.com/watch?v=d1Dpyin-99M
and also
http://www.dd-wrt.com/wiki/index.php/Multiple_WLANs
Basically I did this:
1. Set up VLAN and named it GUEST
2. Set no security (tried also setting WPA, but same result)
3. Establish a bridge (br1) and assigned ath0.1 to that bridge
4. Set up an IP range 192.168.2.1 whereas my main has 192.168.11.1. Both have same subnet mask 255.255.255.0.
5. Established a separate DHCP server (DHCPD)
I get a separate SSID to work, but it will not distribute an IP from the defined range I have set - and will not access the internet. I have made sure that DNSMasq for DHCP is checked.
Any clues?
[/img] |
|