Posted: Mon Dec 12, 2011 22:56 Post subject: Any build higher than 17201 for Routerstation does not work!
Hi,
I noticed that i can not update to any newer builds after 17201 via webflash not TFTP.
Downgrade is not a problem just 17967 and onwards gives an update error.
There where always two firmware files available for the Routerstation but from build 17967 on there is only one file available called ubnt_rs-firmware.bin, but this is the one we need for Webflash.
I have an R52Hn card and a another 802.11b/g card in the RSPRO. When I do a site survey now on the R52Hn card which I have set to 802.11a/n only it shows the other 802.11b/g cards SSID. This never use to be the case and its showing the RS`SI as 13~ DB which im hoping wont cause any problems.
SSID1 AP 00:0C:42:XX:XX:XX 10 11 -95 100 No 0 150(b/g/n)
SSID2 AP 02:0C:42:XX:XX:XX 10 8 -95 100 No 0 150(b/g/n)
You say: This never use to be the case
So I assume that you have this after an update or not?
Wich build are you using and what was the version before? _________________ Regards,
Vaako
1x Netgear R7800 Nighthawk - firmware not decided yet !!!!
1x Netgear R7000 Nighthawk r36410
1x Ubiquiti RouterStation Pro DD-WRT r23204 std (12/24/13)
1x Asus RT-N16 SVN revision 20675 NEWD-2 K2.6
1x Linksys E4200 v3.0 r34777 mega (01/31/18 )
1x Buffalo WZR-HP-G300NH B0 B0 Gargoyle FW
1x Linksys WRT600N v1.1 (Bricked)
1x Linksys WRT54GL v1.1 (DD-WRT 26446)
1x Linksys WRT54GS v2.2 (DD-WRT 26446)
1x Linksys RVS4000 (stock fw)
3x D-Link DWL-7100AP (openWRT)
2x TP-Link TL-WA801ND (Bridge mode) 100mW TX-Power
Asus WL-520GU SVN 16403M NEWD-2 Eko std-nokaid
4x Fonera with Gargoyle FW
adamtrd: Thank you Can you tell me if i lost configuration on routerstation if i use r18777. Can i flash it via web interface? -My routerstation is on top of buiding.
I flash it via web interface, routerstation work (routing, NAT and port forward also) but web interface is not working- i can not plug off device at this moment becouse i am 50 km away from AP. Web interface after flashing not work in WAN and also LAN network . i hope in manual reboot. I try it tomorrow