Posted: Wed May 30, 2012 20:20 Post subject: me too
I also recently bought a dir-615 H2. I hope you can make the port work, my D revision one is working brilliantly as a repeater using DD-WRT and I hope to do the same with this one
There is a thread on here and it stays high up on first page in this section.
The header says "New Build!!........." _________________ Kernel panic: Aiee, killing interrupt handler!
But according to that thread new build didn't work for D-Link DIR615 Rev. H1. So I guess the problem is still open.
Yeah, I couldn't get it to run on a H1 device. Maybe it works with a H2 one.
I don't think this is a hardware problem but maybe a stock firmware version difference based on sales region, not unusual for D-Link..
So for those who flash dd-wrt, please report your stock firmware version, region and failure/success to load dd-wrt. _________________ Kernel panic: Aiee, killing interrupt handler!
I'll ask to have this thread moved to Ralink section of the forum where we can continue. _________________ Kernel panic: Aiee, killing interrupt handler!
-no success via WebInterface
-no success via "Emergency Room"
It looks like it is updating.
There is no error message during the update.
After the update the router is not reachable via ping or browser.
Power LED is orange (should be green).
Updated Dlink FW from v8.01 to v8.03.
Tried to flash via WebInterface with the dd-wrt FW: dlink-dir615h-factory-webflash.bin
Seems to be successfull, but same as with 8.01: LED is orange. No ping, No WebInterface.
Tried the same with the „Emergency Room“, same result: LED is orange. No ping, No WebInterface.
So I went back to the Dlink FW v8.03
Last edited by Billy.B0b on Sat Jun 09, 2012 22:04; edited 1 time in total
Updated Dlink FW from v8.01 to v8.03.
Tried to flash via WebInterface with the dd-wrt FW: dlink-dir615h-factory-webflash.bin
Seems to be successfull, but same as with 8.01: LED is orange. No ping, No WebInterface.
Tried the same with the „Emergency Room“, same result: LED is orange. No ping, No WebInterface.
So I went back to the Dlink FW v.803.
Just curious, but where did you find dlink fw 8.03?