New EKO Builds 4/7/12 18946 - Supports the new Cisco's

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9  Next
Author Message
eXceed
DD-WRT Novice


Joined: 28 Dec 2009
Posts: 2

PostPosted: Mon Apr 23, 2012 8:10    Post subject: Reply with quote
E4200 here, notice that when using DNSMasq clients DHCP doesn't work, this has occurred since build 17990. DHCP is set to authoritative.

Also with this build wireless at 20Mhz constantly drops out and device needs to be rebooted.

Intermittently the internet would stop working as well, back to 17990 for now as it seems the most stable with regards to connection and wireless up time. Is there anything I can do to help/test?
Sponsor
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Mon Apr 23, 2012 10:03    Post subject: Reply with quote
i did an update

through telnet with mtd on belkin f7d4302. its bricked.
cant get into mini cfe or else. front light does not lit. mhhmhmh

_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
biomesh
DD-WRT Novice


Joined: 22 Jul 2006
Posts: 5

PostPosted: Mon Apr 23, 2012 15:00    Post subject: Reply with quote
This build is working fine on the following 3 devices (all running as APs only)

e3000 - dd-wrt.v24-18946_NEWD-2_K2.6_big-nv60k.bin
e4200 - dd-wrt.v24-18946_NEWD-2_K2.6_big-nv60k.bin

e900 - dd-wrt.v24-18946_NEWD-2_K2.6_big-nv64k.bin and dd-wrt.v24-18946_NEWD-2_K2.6_mini-e900.bin
joecop67
DD-WRT User


Joined: 09 Feb 2012
Posts: 425
Location: Columbus, Ohio

PostPosted: Mon Apr 23, 2012 21:30    Post subject: Reply with quote
deleted

Last edited by joecop67 on Wed Aug 29, 2012 21:37; edited 2 times in total
GH0
DD-WRT User


Joined: 05 Dec 2008
Posts: 249

PostPosted: Mon Apr 23, 2012 23:09    Post subject: Reply with quote
USB Drives still do not automount correctly or read Ext2/3 correctly on the ASUS RT-N66U:

http://svn.dd-wrt.com/ticket/2497

Two people have confirmed this so far.
Macgyver
DD-WRT Guru


Joined: 26 Nov 2008
Posts: 700
Location: Toronto, Canada

PostPosted: Tue Apr 24, 2012 7:51    Post subject: openvpn not working since 16214 tested very build since Reply with quote
OpenVPN is not working since build 16214 using this simple config...working ok up to that build what is different now? It connects to the remote network but can only access the remote router, not browse the internet (redirect default gateway option seems broken).
Also wireless on 5GHz band and 2.4 seem to not be as stable as 16214



vpn.JPG
 Description:
 Filesize:  66.12 KB
 Viewed:  28852 Time(s)

vpn.JPG



_________________

Hardware that works for me:
RT-N66U MerlinWRT 3.0.0.4.374.33_beta3b
E3000 WDS Kong v21661
Spc.
DD-WRT User


Joined: 29 Mar 2007
Posts: 74

PostPosted: Tue Apr 24, 2012 21:06    Post subject: Reply with quote
I tested this build on Linksys Cisco E2500.

I found this problems:
1. 40MHz doesn't work, radio works on 20MHz, even if you select and set it 40MHz.
2. 5GHz radio isn't recognized
3. Maximum n speed is set to 144Mbit/s because of 20MHz radio limit.
4. Channel selection is sometimes not working correctly, if user selects 40MHz upper Channel 5 it switches to channel 7 20MHz only.
benjiboy
DD-WRT Novice


Joined: 25 Apr 2012
Posts: 2

PostPosted: Wed Apr 25, 2012 18:45    Post subject: E1200 works great Reply with quote
Got a Cisco Linksys E1200 v1 router the other day and put dd-wrt.v24-18946_NEWD-2_K2.6_mini-e1200v1.bin. Works great!

An important note -- I first did a hard reset after flashing to the new firmware and it didn't appear to be working. I did a power cycle and the bootloader responded to pinging. Did a soft reset and it worked. Someone else also mentioned needing to do a soft reset.
RobWheeler
DD-WRT Novice


Joined: 27 Apr 2012
Posts: 2

PostPosted: Fri Apr 27, 2012 23:03    Post subject: Reply with quote
Loaded 18702 on my Asus n66u and got very frustrated trying to get WAN access.

Found 18946 and it connected straigthaway and appears stable Very Happy

Was interested in DD-WRT for bandwidth limiting, will this be available anytime in the GUI? Would be happy to purchase the Professional Activation to get this working. In the meantime I'll keep playing with iptables - had success with limiting download speed, but not upload unfortunately.
Cancan
DD-WRT Novice


Joined: 07 Jun 2006
Posts: 38
Location: U.S.A.

PostPosted: Sat Apr 28, 2012 7:31    Post subject: Same Issues Here! Very Unreliable... Reply with quote
Spc. wrote:
I tested this build on Linksys Cisco E2500.

I found this problems:
1. 40MHz doesn't work, radio works on 20MHz, even if you select and set it 40MHz.
2. 5GHz radio isn't recognized
3. Maximum n speed is set to 144Mbit/s because of 20MHz radio limit.
4. Channel selection is sometimes not working correctly, if user selects 40MHz upper Channel 5 it switches to channel 7 20MHz only.


Same issues on the WRT 6000N...

Each little bug described above is chronic. Every long awaited client connection is a slow meager process that inevitably ends in tears! Need some fresh trouble free firmware Echo! Any chance you can hook me up please?
Pretty please?
JC~
lawleo
DD-WRT Novice


Joined: 17 Sep 2011
Posts: 25

PostPosted: Sat Apr 28, 2012 15:19    Post subject: Reply with quote
is that the xinetd not working in this build?

I try to start xinetd(from optware) but failed.

_________________
Belkin N600 Play Max HD F7D4301v1
daveM
DD-WRT Novice


Joined: 02 May 2011
Posts: 41

PostPosted: Sat Apr 28, 2012 21:02    Post subject: Re: openvpn not working since 16214 tested very build since Reply with quote
Macgyver wrote:
OpenVPN is not working since build 16214 using this simple config...working ok up to that build what is different now? It connects to the remote network but can only access the remote router, not browse the internet (redirect default gateway option seems broken).
Also wireless on 5GHz band and 2.4 seem to not be as stable as 16214


Try setting compression to 'adaptive'.
ensastiga
DD-WRT Novice


Joined: 29 Jul 2011
Posts: 4

PostPosted: Wed May 02, 2012 0:08    Post subject: performance report Reply with quote
I have two e1500 running in a WDS arrange with a F7D8302 v1 acting as the host, all units running 18946 std-usb-nas (WDS was really inconsistent if the F7D8302 was loaded with any other build but 18946), they have been working great so far (2 days).

Automatic Drive Mount is not working properly out of the box, it mounts "Optware" and "Data" in the same /opt mounting point claiming they are ext2
partitions (not reflected in the automatic drive mount log but using the mount utility in shell made it obvious):

Code:
 
--- /dev/discs/disc0/disc
Block device, size 1.819 TiB (2000398934016 bytes)
DOS/MBR partition map
Partition 1: 691 MiB (724566016 bytes, 1415168 sectors from 2048)
Type 0x83 (Linux)
Ext3 file system
Volume name "Optware"
UUID A5148267-0540-4CEE-BFC2-A265A177CD7A (DCE, v4)
Volume size 691 MiB (724566016 bytes, 176896 blocks of 4 KiB)
Partition 2: 1.111 GiB (1193279488 bytes, 2330624 sectors from 1417216)
Type 0x82 (Linux swap / Solaris)
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
Swap size 1.111 GiB (1193271296 bytes, 291326 pages of 4 KiB)
Partition 3: 1.818 TiB (1998479949824 bytes, 3903281152 sectors from 3747840)
Type 0x83 (Linux)
Ext3 file system
Volume name "Data"
UUID 35589CA6-600C-485A-869A-493DA48BBE49 (DCE, v4)
Volume size 1.818 TiB (1998479949824 bytes, 487910144 blocks of 4 KiB)
Status: Mounted on /opt
Status: Mounted on /opt


once you unmount them sometimes it recognize partitions correctly, for now and as a "duct tape" fix I came up with this as a startup script :

Code:

umount /opt
umount /opt
mount -t ext3 /dev/discs/disc0/part1 /opt
mount -o noatime -t ext3 /dev/discs/disc0/part3 /mnt
swapon /dev/discs/disc0/part2
service transmission start


this without disabling the automount feature in the GUI works for me, hope someone finds it useful.

https: working

pptp vpn server: working

F7D8302 v1 5Ghz radio: working

one e1500 is even running optware packages, BTW the loop.ko k26 module linked in the optware CIFS auto mount procedure in the wiki seems not to be working anymore.

PS. WDS was really inconsistent if the F7D8302 was loaded with any other build but 18946.

Thanks eko I so much appreciate your effort!
krantz
DD-WRT Novice


Joined: 02 May 2012
Posts: 1

PostPosted: Wed May 02, 2012 4:30    Post subject: Install report on E1200 V1 Reply with quote
Installation went smooth, no problems at all.

I bought the E1200 today (after reading the supported devices list), connected it, plugged RJ45, accessed web interface, clicked firmware upgrade, selected the .bin file... I left it alone for 15 minutes and then reboot.

Total time:20 minutes.

Thanks a lot for the effort.
wolfvt13
DD-WRT Novice


Joined: 15 Apr 2012
Posts: 10

PostPosted: Wed May 02, 2012 20:12    Post subject: Reply with quote
Installed on linksys E1550 then updated to K2.6_mega-nv60k two weeks ago, everything seems to be working fine except those:
-When I restore to factory defaults the router freezes and need to be power cycled.
-When I do many configurations the router some times freezes and need to be power cycled.
-I dont know if this is a bug o me but I was not able to configure a bridge for virtual interface to make a wifi guest network, the hosts can connect to the lan(192.168.2.0)(my main lan is 192.168.1.0) but not to the wan.
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9  Next Display posts from previous:    Page 6 of 9
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum