I just did a 30/30/30 and flashed mine with this new version. It seems to work just fine for me. With wireless power set to 251, wireless signal strength is the same or slightly better.
Adjusted TX power and it still seemed a little weak.
Port forwarding and DMZ are not working properly on this build. All connections from the outside are mangled and presented to an internal machine as if they originate from the router itself. This breaks any service run behind the router and it must be fixed.
The last dd-wrt firmware works fine. I tested different options around access restrictions with success (more options than the original version) .
If somebody knows how to switch off the dome light , I'm interested !
When you say the latest, do you mean the latest stable build from the homepage or the version linked above by tathagata?
I'm trying Tath's version and having all sorts of weird issues with access restrictions and static leases.
Specifically:
* DHCP reservations are just not being offered
* Trying to enable timed access restrictions seems wonky. They SOMETIMES enable on schedule, but then dont release, so the block stays in place.
* Turning the restriction policy off manually won't release it either, which means the only solution is a router reboot
I'm going to try hard reset and reinstall to see if it solves the issue. Will report back.
When you say the latest, do you mean the latest stable build from the homepage or the version linked above by tathagata?
Yes.
Quote:
* DHCP reservations are just not being offered
- Yes you are right, no menu to do that .
Quote:
* Trying to enable timed access restrictions seems wonky. They SOMETIMES enable on schedule, but then dont release, so the block stays in place.
- I did time condition for one MAC @ and the test was ok , I tested also to block some URL. It was ok. But the "client" didn't see any explanation or "block" page, just no action.
Anyway, I came back to the original version.
By "DHCP Reservations" do you mean "Static Leases" which is available under Services->Services?
I wonder if it is possible to get dlna working for this. I tried getting it installed, but ran into trouble trying to get opkg. I completely blame my inexperience though. There must be a way, but I have given up with it. I'm hoping for this to be supported natively in the future, but I am more than happy using this firmware as is.
Also, I pushed my ca.crt over via winSCP, set comp-lzo to *blank*, and used a "route" in the additional config per my config from my server admin.
Last but not least there is something wrong with the status page. (status_openvpn.asp) It renders your GUI unusable and it can only be fixed by either unplugging the router or killing the httpd (killall httpd). I read somewhere that this is possibly due to a bug in local logging.
I'm having some problems with my xbox360 (both 2.4ghz wifi AND wired cable) seeing my computer (5G havent tried wired and don't want to.) And it also won't pick up my media server on the local VPN network where as my iPhone does.