Tagged Vlan über Wlan bridge

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC basierende Hardware
Author Message
chipware
DD-WRT Novice


Joined: 20 May 2012
Posts: 7

PostPosted: Sun May 20, 2012 14:31    Post subject: Tagged Vlan über Wlan bridge Reply with quote
Hallo,
ich möchte 2 Standorte mittels einer Bridge (2x WRT54GL) und 2 managable Switch verbinden und mehrere VLAN's über diese Bridge weiterleiten. Bei beiden Standorten sind also mehrere Vlans (z.B. 1=privat, 2=public wifi, 3=voip) und möchte diesselben Zugriffe auf den zweiten Standort haben.
Das Problem ist, daß ich nicht die getaggten Packete (den Trunk Port) über die Bridge bringe.
Vielleicht kann mir jemand weiterhelfen.
danke im voraus.
roland
Sponsor
chipware
DD-WRT Novice


Joined: 20 May 2012
Posts: 7

PostPosted: Mon May 21, 2012 18:57    Post subject: Reply with quote
Hallo,
kennt sich niemand aus oder ist meine Frage zu simple? Shocked
grüsse
roland
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1353
Location: Germany

PostPosted: Mon May 21, 2012 19:56    Post subject: Reply with quote
weil der wrt54gl die tags wieder entfernt.
_________________
RT-N66U @ kongac Build 24200M K3.10.40
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
chipware
DD-WRT Novice


Joined: 20 May 2012
Posts: 7

PostPosted: Tue May 22, 2012 6:00    Post subject: Reply with quote
Hallo,
laut DD-WRT Wiki aber eben schon!

http://www.dd-wrt.com/wiki/index.php/VLAN_Support

Model H.W. rev Switch Chip Port-based VLAN's 802.1q
WRT54GL v1.1 BCM5352E Yes

oder werden die Pakete nur nicht über die Bridge übertragen?

grüsse
roland
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1353
Location: Germany

PostPosted: Tue May 22, 2012 9:11    Post subject: Reply with quote
klar KANN der trunks, aber der switch hackt dat frame trotzdem ab, wenns ein fremdgerät anhängt. das musste im wrt konfigurieren, dammiter das tag wieder dranscharaubt. wie zuverflässig das über die GUI geht, keine Ahung.

Quote:

i'am not sure about WAP54G, but probably it dont'have switch and forward all tagged frames as well. WRT54G have 802.1Q vlan switch, and forwards only these tagged frames, what is it configured to do. In older versions with the adm6996 switch, we can completely turn off 802.1Q with adm6996.o module. Look at http://www.openwrt.org/forum/viewtopic.php?t=363 , then it will be forwarding all tagged packets from whatever vlans (i have tried up to vlan120).
For the newer versions of WRT's is not such module done, because different switch chip, and we can't turn vlan support completely off. But via nvram variables, we can program switch to forward vlan tagged frames (not untag them) for every port. For example forwarding a vlan5, looks like this:

nvram set vlan5ports="0* 1* 2* 3* 4* 5*"

to vlan5 belongs all ports and * makes all of them tagged, so we receive tagged frames via wireless, pass these to switch tagged port 5 and output these via tagged ports 0-4. I, myselt not tried this, but in theory it must work. In such way we can bypass up to vlan15. There is no way to bypass for example vlan40.

vor jahren musste ich auch mal tagged vlan frames forwarden, bzw tu´s immer noch. nach tagender verzweiflung ( Very Happy ) fand ich dann obiges im openwrt forum, und schwupp: alles paletti.

_________________
RT-N66U @ kongac Build 24200M K3.10.40
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
chipware
DD-WRT Novice


Joined: 20 May 2012
Posts: 7

PostPosted: Tue May 22, 2012 10:00    Post subject: Reply with quote
Hallo,
danke für die Hilfe jedoch ist der Thread http://www.openwrt.org/forum/viewtopic.php?t=363 nicht mehr verfügbar. Könntest Du mir kurz erklären was ich machen muss?
grüsse
roland
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1353
Location: Germany

PostPosted: Tue May 22, 2012 10:05    Post subject: Reply with quote
naja, an den ports, wo die lan strippen dranhängen, das vlan tag wieder dranhängen.

da musste mir schon sagen an welchen lanports usw uswfort.

_________________
RT-N66U @ kongac Build 24200M K3.10.40
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
chipware
DD-WRT Novice


Joined: 20 May 2012
Posts: 7

PostPosted: Tue May 22, 2012 11:03    Post subject: Reply with quote
Hallo,
also die Lan ports zu taggen funktioniert ja bereits. Habe es mit einem Switch noch probiert und es klappt.
Das einzige was nicht klappt ist die tags über wlan zu schicken. Wahrscheinlich muß ich dort eth0 taggen, oder?
grüsse
roland
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1353
Location: Germany

PostPosted: Tue May 22, 2012 18:40    Post subject: Reply with quote
glaub wir reden was aneinander vorbei. könnte watt länger dauern im forum. vielleicht eher instant messenger ? lösung kann hbier dann immernoch gepostet werden.
_________________
RT-N66U @ kongac Build 24200M K3.10.40
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
chipware
DD-WRT Novice


Joined: 20 May 2012
Posts: 7

PostPosted: Wed May 23, 2012 10:17    Post subject: Reply with quote
Hallo,
gerne, habe Dir eine private Nachricht geschickt.
grüsse
roland
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1353
Location: Germany

PostPosted: Wed May 23, 2012 12:17    Post subject: Reply with quote
irgendwie habe ich die nicht Very Happy
_________________
RT-N66U @ kongac Build 24200M K3.10.40
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC basierende Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum