Access point Dhcp Problem here , plz help me

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
karemmohsen
DD-WRT Novice


Joined: 13 Jun 2011
Posts: 2

PostPosted: Mon Jun 11, 2012 23:19    Post subject: Access point Dhcp Problem here , plz help me Reply with quote
hi

i have a router 192.168.1.1 D-link without Dhcp server , all users must put an ip in his device manually

and i have an access point Netgare Wg602 v4 with DD-wrt v24-sp1 micro

i want to make it as Ap , i gave it an ip ( 192.168.1.161 ) and i follow the steps but there is a problem , when i enable dhcp on it users on LAN can have an ip from it and their gateway will be 192.168.161
and when i disable the dhcp , i can't use my android phone cuz i can't give it an ip manually

so my problem that i want to make this as Ap
and enable dhcp only for wireless devices and no one from LAN can take an ip

thx
Sponsor
madman999
DD-WRT Guru


Joined: 11 Jun 2012
Posts: 1042

PostPosted: Tue Jun 12, 2012 13:12    Post subject: Reply with quote
why aren;t you running a dhcp server on the primary 192.168.1.1 router?

i followed the steps in this to create a wireless ap to my main router.

http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point

secondary router is hard wired though with a static ip address. dhcp is turned off so it gets ip addresses from primary router. wireless ssid and security is the same on both routers but with different channels so i can roam with my devices and seamless connect from one AP to the next.
karemmohsen
DD-WRT Novice


Joined: 13 Jun 2011
Posts: 2

PostPosted: Sun Jun 17, 2012 1:15    Post subject: Reply with quote
madman999 wrote:
why aren;t you running a dhcp server on the primary 192.168.1.1 router?

i followed the steps in this to create a wireless ap to my main router.

http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point

secondary router is hard wired though with a static ip address. dhcp is turned off so it gets ip addresses from primary router. wireless ssid and security is the same on both routers but with different channels so i can roam with my devices and seamless connect from one AP to the next.



the problem here that the primary router must have its dhcp off , so the question here how i can do that i want to make the secondery one as Ap
and enable dhcp only for wireless devices and no one from LAN can take an ip
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum