[kraker]

Hi all,

we have 5km ptp link with below config.

wds ap
superchannel
security disabled
mk52hn mimo cards
chain 1+2
ack 5000
NA mixed or Nonly


wds station
superchannel
security disabled
mk52hn mimo cards
chain 1+2
ack 5000
NA mixed or Nonly

with full 20 mhz mode everything is working perfect(ftp 80mb between locations)but we need more bandwidth .When we change the 40 mhz turbo mode links are not work.(station is not see the ap signal) with v19519.I want to know which version is stable and support 40 mhz with this equip.During the lab. test beta 14896 version is support 40mhz (ftp max.230mb ,20mt points distance) but version is not working properly.


thanks your suggestions...

[Sash]

p2p:

upgrade 1st!
uses wpa2/aes!

[kraker]

this is the test result of related equip.

wds ap----40mhz turbo
wds station ----20-40 mhz dynamic..

6,3 km.

[Sash]

i dont see the problem. its very good speed

[LOM]

I don't think dual streams will do anything for you with such a long distance between the nodes.
40Mhz channel width and single stream will not give you more than 75-80Mbps effective transfer speed so you are at max already.

[kraker]

Can I get more bandwidth than this with the other equip. like Laguna gateworks hardware or somethings?but in free band not mw links...

thanks your suggestions...

[Sash]

maybe some better antennae will squeeze some more mbits out of the link. but u will barely get over 100mbits.

[kraker]

after some phy. and soft. optimisation link now very stable and strong...