[prupert]

Hi

I get very high CPU usage via the update_hosts.sh script when I enable mypage (sleep 60 runs and runs and doesn't stop). I was wondering if I am using an out of date version.

I've done some browsing of the source website http://ddwrt.basmaf.com/ but can't tell what the current version of OTRW2 is, to check my version against. Any pointers?

Also, is upgrading the same as installing for the first time, just execute the pre_optware script?

Great job by the way on OTRW2, I love bash.

[wabe]

Basmaf's site seems to have been down for quite a while. Anyone knows what's up?

[goRt]

[emwgee]

Hi,


Can somebody help explain how "rotate_log" works?


Much appreciated.

[bkochis]

Hello all,
I cannot get Samba3 to start at all. I keep getting this error:

root@DD-WRT:/opt/etc/init.d# service samba start
Service "samba" is disabled (/opt/etc/init.d/S08samba)
* samba is not running

I checked the smb.cnf file, looked at a number of other posts online, did a chmod on the S80samba script.

No luck!!
Help, hints, suggestions. (Sorry, Big F__ing Hammer is not a valid one)

Router Name DD-WRT
Router Model Linksys E3000
Firmware Version DD-WRT v24-sp2 (08/12/10) std-usb-ftp - build 14929
MAC Address68:7F:74:9E:9D:7B
Host Name
WAN Domain Name hsd1
LAN Domain Name
Current TimeWed, 04 Jun 2014 18:47:51
Uptime33 min
=========================================
CPU
CPU Model Broadcom BCM4716 chip rev 1
CPU Clock 480 MHz
Load Average
2%0.04, 0.03, 0.00

[slobodan]

[bkochis]

[madman999]

[ShakyUser]

I have finally found some time to take a stab at Take 2, installing on an E4200 equipped with the latest kingkong 22000++.

The first service I went to set up is vlighttpd, since the has caused me some problems in the past, and sure enough as soon as I start the service I am getting:

[madman999]

I had this issue when I first configured lighttpd on my install. I think it was a well known problem.

I believe there was some entry I made into the lighttpd.conf file to fix that. I just don;t remember what it is.

i am currently still running lighttpd on my router.

[ShakyUser]

[madman999]

where is the location of those conf files?

[ShakyUser]

[ShakyUser]

[madman999]

here is the contents of my lighttpd.conf

I think there is something here that I had to modify

# lighttpd configuration file
#
# use it as a base for lighttpd 1.0.0 and above
#
# $Id: lighttpd.conf 8860 2008-08-05 10:56:16Z engy $

############ Options you really have to take care of ####################

## modules to load
# at least mod_access and mod_accesslog should be loaded
# all other module should only be loaded if really neccesary
# - saves some time
# - saves memory
server.modules = (
# "mod_rewrite",
# "mod_redirect",
# "mod_alias",
"mod_access",
# "mod_cml",
# "mod_trigger_b4_dl",
# "mod_auth",
# "mod_status",
# "mod_setenv",
# "mod_fastcgi",
# "mod_proxy",
# "mod_simple_vhost",
# "mod_evhost",
# "mod_userdir",
# "mod_cgi",
# "mod_compress",
# "mod_ssi",
# "mod_usertrack",
# "mod_expire",
# "mod_secdownload",
# "mod_rrdtool",
"mod_accesslog" )

## a static document-root, for virtual-hosting take look at the
## server.virtual-* options
server.document-root = "/opt/share/www/"

## where to send error-messages to
server.errorlog = "/opt/var/log/lighttpd/error.log"

# files to check for if .../ is requested
index-file.names = ( "index.php", "index.html",
"index.htm", "default.htm",
"lighttpd/index.html" )

## set the event-handler (read the performance section in the manual)
server.event-handler = "poll"

#"freebsd-kqueue" # needed on OS X

# mimetype mapping
mimetype.assign = (
".pdf" => "application/pdf",
".sig" => "application/pgp-signature",
".spl" => "application/futuresplash",
".class" => "application/octet-stream",
".ps" => "application/postscript",
".torrent" => "application/x-bittorrent",
".dvi" => "application/x-dvi",
".gz" => "application/x-gzip",
".pac" => "application/x-ns-proxy-autoconfig",
".swf" => "application/x-shockwave-flash",
".tar.gz" => "application/x-tgz",
".tgz" => "application/x-tgz",
".tar" => "application/x-tar",
".zip" => "application/zip",
".mp3" => "audio/mpeg",
".m3u" => "audio/x-mpegurl",
".wma" => "audio/x-ms-wma",
".wax" => "audio/x-ms-wax",
".ogg" => "application/ogg",
".wav" => "audio/x-wav",
".gif" => "image/gif",
".jpg" => "image/jpeg",
".jpeg" => "image/jpeg",
".png" => "image/png",
".xbm" => "image/x-xbitmap",
".xpm" => "image/x-xpixmap",
".xwd" => "image/x-xwindowdump",
".css" => "text/css",
".html" => "text/html",
".htm" => "text/html",
".js" => "text/javascript",
".asc" => "text/plain",
".c" => "text/plain",
".cpp" => "text/plain",
".log" => "text/plain",
".conf" => "text/plain",
".text" => "text/plain",
".txt" => "text/plain",
".dtd" => "text/xml",
".xml" => "text/xml",
".mpeg" => "video/mpeg",
".mpg" => "video/mpeg",
".mov" => "video/quicktime",
".qt" => "video/quicktime",
".avi" => "video/x-msvideo",
".asf" => "video/x-ms-asf",
".asx" => "video/x-ms-asf",
".wmv" => "video/x-ms-wmv",
".bz2" => "application/x-bzip",
".tbz" => "application/x-bzip-compressed-tar",
".tar.bz2" => "application/x-bzip-compressed-tar"
)

# Use the "Content-Type" extended attribute to obtain mime type if possible
#mimetype.use-xattr = "enable"


## send a different Server: header
## be nice and keep it at lighttpd
# server.tag = "lighttpd"

#### accesslog module
accesslog.filename = "/opt/var/log/lighttpd/access.log"

## deny access the file-extensions
#
# ~ is for backupfiles from vi, emacs, joe, ...
# .inc is often used for code includes which should in general not be part
# of the document-root
url.access-deny = ( "~", ".inc" )

$HTTP["url"] =~ "\.pdf$" {
server.range-requests = "disable"
}

##
# which extensions should not be handle via static-file transfer
#
# .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
static-file.exclude-extensions = ( ".fcgi", ".php", ".pl", ".py", ".rb" )

######### Options that are good to be but not neccesary to be changed #######

## bind to port (default: 80)
server.port = 8081

## bind to localhost (default: all interfaces)
#server.bind = "grisu.home.kneschke.de"

## error-handler for status 404
#server.error-handler-404 = "/error-handler.html"
#server.error-handler-404 = "/error-handler.php"

## to help the rc.scripts
server.pid-file = "/var/run/lighttpd.pid"


###### virtual hosts
##
## If you want name-based virtual hosting add the next three settings and load
## mod_simple_vhost
##
## document-root =
## virtual-server-root + virtual-server-default-host + virtual-server-docroot
## or
## virtual-server-root + http-host + virtual-server-docroot
##
#simple-vhost.server-root = "/home/weigon/wwwroot/servers/"
#simple-vhost.default-host = "grisu.home.kneschke.de"
#simple-vhost.document-root = "/pages/"


##
## Format: <errorfile-prefix><status-code>.html
## -> ..../status-404.html for 'File not found'
#server.errorfile-prefix = "/home/weigon/projects/lighttpd/doc/status-"

## virtual directory listings
#dir-listing.activate = "enable"

## enable debugging
#debug.log-request-header = "enable"
#debug.log-response-header = "enable"
#debug.log-request-handling = "enable"
#debug.log-file-not-found = "enable"

### only root can use these options
#
# chroot() to directory (default: no chroot() )
#server.chroot = "/"

## change uid to <uid> (default: don't care)
#server.username = "nobody"

## change uid to <uid> (default: don't care)
#server.groupname = "nobody"

#### compress module
#compress.cache-dir = "/tmp/lighttpd/cache/compress/"
#compress.filetype = ("text/plain", "text/html")

#### proxy module
## read proxy.txt for more info
#proxy.server = ( ".php" =>
# ( "localhost" =>
# (
# "host" => "192.168.0.101",
# "port" => 80
# )
# )
# )

#### fastcgi module
## read fastcgi.txt for more info
#fastcgi.server = ( ".php" =>
# ( "localhost" =>
# (
# "socket" => "/tmp/php-fcgi.sock",
# "bin-path" => "/opt/bin/php-fcgi",
# "bin-environment" => (
# "PHP_FCGI_MAX_REQUESTS" => "4000"
# )
# )
# )
# )

#### CGI module
#cgi.assign = ( ".pl" => "/opt/bin/perl",
# ".cgi" => "/opt/bin/perl" )
#

#### SSL engine
#ssl.engine = "enable"
#ssl.pemfile = "server.pem"
#ssl.ca-file = "ca.crt"
#ssl.verifyclient.activate = "enable"
#ssl.verifyclient.enforce = "enable"
#ssl.verifyclient.depth = 1

#### status module
#status.status-url = "/server-status"
#status.config-url = "/server-config"

#### auth module
## read authentication.txt for more info
#auth.backend = "plain"
#auth.backend.plain.userfile = "lighttpd.user"
#auth.backend.plain.groupfile = "lighttpd.group"

#auth.backend.ldap.hostname = "localhost"
#auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
#auth.backend.ldap.filter = "(uid=$)"

#auth.require = ( "/server-status" =>
# (
# "method" => "digest",
# "realm" => "download archiv",
# "require" => "user=jan"
# ),
# "/server-config" =>
# (
# "method" => "digest",
# "realm" => "download archiv",
# "require" => "valid-user"
# )
# )

#### url handling modules (rewrite, redirect, access)
#url.rewrite = ( "^/$" => "/server-status" )
#url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
#### both rewrite/redirect support back reference to regex conditional using %n
#$HTTP["host"] =~ "^www\.(.*)" {
# url.redirect = ( "^/(.*)" => "http://%1/$1" )
#}

#
# define a pattern for the host url finding
# %% => % sign
# %0 => domain name + tld
# %1 => tld
# %2 => domain name without tld
# %3 => subdomain 1 name
# %4 => subdomain 2 name
#
#evhost.path-pattern = "/home/storage/dev/www/%3/htdocs/"

#### expire module
#expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")

#### ssi
#ssi.extension = ( ".shtml" )

#### rrdtool
#rrdtool.binary = "/opt/bin/rrdtool"
#rrdtool.db-name = "/var/www/lighttpd.rrd"

#### setenv
#setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" )
#setenv.add-response-header = ( "X-Secret-Message" => "42" )

## for mod_trigger_b4_dl
# trigger-before-download.gdbm-filename = "/home/weigon/testbase/trigger.db"
# trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
# trigger-before-download.trigger-url = "^/trigger/"
# trigger-before-download.download-url = "^/download/"
# trigger-before-download.deny-url = "http://127.0.0.1/index.html"
# trigger-before-download.trigger-timeout = 10

## for mod_cml
## don't forget to add index.cml to server.indexfiles
# cml.extension = ".cml"
# cml.memcache-hosts = ( "127.0.0.1:11211" )

#### variable usage:
## variable name without "." is auto prefixed by "var." and becomes "var.bar"
#bar = 1
#var.mystring = "foo"

## integer add
#bar += 1
## string concat, with integer cast as string, result: "www.foo1.com"
#server.name = "www." + mystring + var.bar + ".com"
## array merge
#index-file.names = (foo + ".php") + index-file.names
#index-file.names += (foo + ".php")

#### include
#include /etc/lighttpd/lighttpd-inc.conf
## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
#include "lighttpd-inc.conf"

#### include_shell
#include_shell "echo var.a=1"
## the above is same as:
#var.a=1

# Configuration from other optware packages
include_shell "cat /opt/etc/lighttpd/conf.d/*.conf"