Joined: 22 Oct 2009 Posts: 157 Location: North East - USA
Posted: Sat Jun 05, 2010 14:45 Post subject: WHR-G300N with BS14537
I am getting the best WiFi performance with this release I have seen yet. Here are the settings.
Radio: Radio is On
Mode: AP
Network: N-Only
Channel: 11 (2462 MHz)
TX Power: 50 mW
Rate: 300 Mb/s
Encryption - Interface wl0
Enabled, WPA2 Personal
With a Broadcom Wireless N adapter at upstairs I get the following iperf results.
Test 1:
[ ID] Interval Transfer Bandwidth
[148] 0.0-10.2 sec 113 MBytes 92.9 Mbits/sec
Test 2:
[ ID] Interval Transfer Bandwidth
[148] 0.0-10.2 sec 114 MBytes 93.6 Mbits/sec
Since Iperf server is running on a PC connected to one of the 100 Mbits/sec Ethernet ports, the test results are limited with 100Mbits/sec. But I have never seen anything above ~80 Mbits/sec WiFi performance with WHR-G300N before. _________________ WNR3500L DD-WRT-18730-Kong Gateway/Firewall/NAS
WRT54G-TM DD-WRT-14929 Mega (heatsink + 250MHz oc)
WHR-G300N DD-WRT-20548(external antennas)
2x E2000 Tomato-Toastman 0501.2 AP (external antennas)
TEW-652BRP Gargoyle 1.5.9 Client Bridge (antenna upgrade + heatsinks + ventilation)