skygunner
DD-WRT User
Joined: 28 Dec 2008
Posts: 87
|
 Posted: Mon Jun 25, 2012 14:16 Post subject: proper way to clear setting on Dir-600 B1/Dir-300 B? |
 |
It seems the 30/30/30 doesn't work for this router as hold the reset button for 5 seconds while powering on will enter the router's built-in emergency firmware upgrade mode.
Also the clear setting method on this page doesn't seems to work
http://www.dd-wrt.com/wiki/index.php/DIR-600
| Quote: |
If you forget the username or password, or if the configuration becomes really messed up, you can always clear all the non-volitile parameters by doing a 'factory reset'. To do this, with the router already fully booted, press and hold the reset button for 5~6 seconds and release. The router will boot back up and answer to 192.168.1.1 just as if it had just been flashed with DD-WRT.
|
I've lost the web password for this unit, trying to clear the settings but no luck.
Can revert back to the original dlink firmware via emergency page but that won't clear the dd-wrt side's settings.
_________________
wl-500gP v2 BS v24-sp2 mega - 13525
DIR600 Rev.B BS v24-sp2 std - 14311 |
|
feliciano
DD-WRT Guru
Joined: 24 Oct 2008
Posts: 545
Location: Venezuela
|
| Posted: Fri Jun 29, 2012 2:16 Post subject: |
|
tftp again the firmware.
_________________
Mostly worked with: WR850Gv2, WHR-HP-G54, WRT54GL, WRT150N, WL-520gU, DIR-600 B1, WLI-TX4-G54HP, WHR-HP-GN...
Working with: F7D7301, F7D3302, among others. |
|
