Posted: Mon Jun 25, 2012 14:16 Post subject: proper way to clear setting on Dir-600 B1/Dir-300 B?
It seems the 30/30/30 doesn't work for this router as hold the reset button for 5 seconds while powering on will enter the router's built-in emergency firmware upgrade mode.
If you forget the username or password, or if the configuration becomes really messed up, you can always clear all the non-volitile parameters by doing a 'factory reset'. To do this, with the router already fully booted, press and hold the reset button for 5~6 seconds and release. The router will boot back up and answer to 192.168.1.1 just as if it had just been flashed with DD-WRT.
I've lost the web password for this unit, trying to clear the settings but no luck.
Can revert back to the original dlink firmware via emergency page but that won't clear the dd-wrt side's settings. _________________ [Broadcom]
DIR868L RevA -> r51506
DIR868L RevA -> r51440
Linksys EA6900-> r42819 STD
WL-500gP v2 --->
Joined: 24 Oct 2008 Posts: 1079 Location: Latin America
Posted: Fri Jun 29, 2012 2:16 Post subject:
tftp again the firmware. _________________ If you want support, please read first the announcements and forum rules.
Si usted desea ayuda, por favor lea primero los anuncios y las reglas del foro.