The AP works fine for all direct connected clients, including internet connection and encryption.
The bridge for now only gets internet connection, if no encryption is enabled. With encryption, it only gets connection to the other clients, APs, routers, printers, NASs etc in my network, but no internet connection.
Joined: 04 Nov 2012 Posts: 525 Location: Acapulco, Mexico
Posted: Thu Nov 20, 2014 18:00 Post subject:
Socke wrote:
The bridge for now only gets internet connection, if no encryption is enabled. With encryption, it only gets connection to the other clients, APs, routers, printers, NASs etc in my network, but no internet connection.
As I posted before You have to solve the encryption issue _________________ TP-Link: TL-WR741ND V4
TP-Link: TL-WR842ND V2
hmm, i have to solve my encryption issue to solve my encryption issue...
well, i tried several things over the last weeks, it's not working stable. It works for several hours, maybe days, but then it stops working. No mater if encryption is on or off.
That's nearly the same behaviour i had with the original firmware, so maybe that's a hardware-issue ?!?
maybe someone has a proposal for a different hardware, working with ddwrt as bridge and of course rock stable for month.
I've modified the header of the DD-WRT 27506 factory-to-ddwrt build intended for TL-WA801ND v1, so that it will flash on a TL-WA730RE v1 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-27506 webflash build for TL-WA801ND v1.
Disclaimer: I haven't tested the attached build myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it. _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Posted: Thu Feb 25, 2016 8:45 Post subject: web gui and ssh unreachable
Hey there,
I flashed ddwrt a while ago and every time I set it up I lost connection to the web gui and ssh.
I reseted it and got the initial gui back but even if I enable the web gui on port 8080 and the ssh on 22 the ports are still blocked and nothing is accessible.
Posted: Tue Mar 07, 2017 19:27 Post subject: virtual interface low bandwidth
Router is working as a wireless repeater.
Everything works fine except that the bandwidth of the virtual interface is very low and seems limited at around 4Mbps. You can see in the attached photo the bandwidth during the two iperf tests between the notebook connected on 65Mbps wifi link and RPI connected through ethernet.
Do you have an idea why the bandwidth is so low and limited?
This build (27506) works perfectly on my 730RE V1 that I use as a wireless access point for private and guest wifi.
CPU usage is now around 3% idle which used to be around 40% with version r19342. Also, no more crashes! Yay!