I just got a new AC66U and flashed it with the download from the router database (v24 preSP2 build 21061). Unfortunately, whenever I hit "apply" on any screen I get an immediate "The connection was interrupted" as soon as I hit the apply.cgi page.
So I go back to 192.168.1.1 and try to upload the 24661 build (dd-wrt-24461-Asus_RT-AC66U.trx) and it immediately flashes to the error connection reset message. At this point, I have to turn off the router's power and reboot before I can get back to a GUI (which will show 21061).
Posted: Tue Sep 23, 2014 7:30 Post subject: toolchain and kernel source
@Kong,
Is it possible that you share your full kernel source and toolchain used for building your K3-AC firmware?
I'd like to compile a few kmods for my router.
Posted: Fri Sep 26, 2014 22:08 Post subject: Latest firmware for Asus RT-AC66U don´t work
I bought a new ASUS RT-AC66U today and followed this guide how to flush it with DD-WRT, http://www.dd-wrt.com/wiki/index.php/Asus_RT-AC66U. I downloaded dd-wrt-24461-Asus_RT-AC66U.trx from the FTP and after I have flashed the router with this I got very starnd behavor. I felt like not all things are working. For example radio was off I couldn´t enable it.
I then downloaded dd-wrt-Asus_RT-AC66U.trx from the router database search, http://www.dd-wrt.com/site/support/router-database and when I flashed the router with that software everything works great. THe only this is that the build of this relese if very old, Firmware: DD-WRT v24-sp2 (03/25/13). Do any one have any idea why the latest version doens´t work for me or know a never version than Firmware: DD-WRT v24-sp2 (03/25/13) working os RT-AC66U?
Read the stickies at the top of this forum. Notice where it says not to use the router database.
Also look at my sticky for installing dd-wrt on the rt-n66u and rt-ac66u. _________________ I am far from a guru, I'm barely a novice.
Read the stickies at the top of this forum. Notice where it says not to use the router database.
Also look at my sticky for installing dd-wrt on the rt-n66u and rt-ac66u.
OK but I only got the problem when using the latest firmware from the ftp. Is it possible for you to linkt o your post you are talking about? I can´t find them
Posted: Wed Oct 01, 2014 16:59 Post subject: LAST KONG VERSION PPTP VPN NOT WORKING
Router Model
Asus RT-AC66U
Firmware Version
DD-WRT v24-sp2 (09/16/14) kongac - build 25015M
Kernel Version
Linux 3.10.55-rc1 #82 Tue Sep 16 21:29:44 CEST 2014 mips
Guys I downloaded the above latest KONG version for the router and flashed it and it works OK I guess, On the 5GHz antenna I never get more than 150Mb throughput on my N Mobile Phone. I wanna know why flashing this could have messes up me hooking up to my PPTP VPN when LTP/IPsec works fine. This is weird. Any ideas?? Thanks!!!
Here below is my 5GHz antenna configuration::
Wireless Mode AP
Wireless Network Mode Mixed
Wireless Network Name (SSID) ASUS5GHz
Wireless Channel 149-5.745GHz
Channel Width VHT (80+80 MHz)
Extension Channel lower lower
ENABLE
DISABLE
ENABLE
ENABLE
Sensitivity Range is 300
BRIDGED
[/img]
Posted: Wed Oct 29, 2014 13:49 Post subject: I just buy a RT-AC66U
Hi guys i just buy a RT-AC66u , and I install dd-wrt version of 25179 for Asus RT-AC66U .
Do i need to do something else ?
Do i have to config something to get the best out of it?
Is this the best version of dd-wrt ?
There is some harding that i have to do (like disable telnet?)
Cheers! and thks for thi great community and support.
[/list]