Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Fri Apr 29, 2016 21:53 Post subject:
look at the qualcomm atheros wifi settings wiki below. things like dont use tkip security, dont use auto channel, dont use dynamic 20/40 use ht20 only, ht40 only, or vht80 only, etc are all in there. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
look at the qualcomm aterros wifi settings wiki below. things like dont use tkip security, dont use auto channel, dont use dynamic 20/40 use ht20 only, ht40 only, or vht80 only, etc are all in there.
look at the qualcomm aterros wifi settings wiki below. things like dont use tkip security, dont use auto channel, dont use dynamic 20/40 use ht20 only, ht40 only, or vht80 only, etc are all in there.
Hi! I found the problem:
"Having this set to TKIP or TKIP+AES in conjunction with incorreto security mode noted above, is THE leading cause of not getting n/ac speeds in DD-WRT"
Posted: Sun May 08, 2016 13:41 Post subject: Re: led dont work, 5ghz wifi too!!!
arrowdau wrote:
5ghz wifi does not work , and the LED are not functional , does anyone know a fully functional and stable version
I transferred 1+ GB from my 'droid phone to my file server over 5Ghz Wifi without any problems with r29519. LEDs aren't on but mine is hidden in another room so it doesn't bother me so much. _________________ TP-Link TL-WDR4300 v1 (NAS) - r54682
Buffalo WZR-600DHP (Gateway, NAS, DDNS, DHCP) - r54682
Netgear R7800 (Gateway, DDNS, DHCP, DNSMASQ w/Pi Hole) - r54682
Netgear R7800 (AP) - r54682
Posted: Mon May 09, 2016 14:47 Post subject: Re: led dont work, 5ghz wifi too!!!
unlucky1 wrote:
arrowdau wrote:
5ghz wifi does not work , and the LED are not functional , does anyone know a fully functional and stable version
I transferred 1+ GB from my 'droid phone to my file server over 5Ghz Wifi without any problems with r29519. LEDs aren't on but mine is hidden in another room so it doesn't bother me so much.
led wds always on, wifi led 5ghz is off , yesterday discovered the problem wifi 5ghz mixed connection does not work dai put " N only " worked well , otherwise the firmware and very good left my best internet.
I have tried the dd-wrt fermware in my tl-wdr4300 v1 in the past and I didn't like the fact it is losing the 5ghz, so I reverted it to the stock firmware, and now I would like again to try the dd-wrt firmware since I am not happy with the stock firmware, so I have 2 questions before I start, one it is good idea to have both 2.4 and 5ghz with same SSID? Second, I was only able to find r25697 dated 22-12-2014, but I see people using r29519 which I think it is newer version, so where I can find this one?
The WiFi dropout have been gone for a bit now. don't recall what version fixed the problem but the new versions have been working quit well lately. I still lose WiFi on the unit but only with large file transfers (2-3gb or larger). I'm suspecting heat is the issue at this point.
I have tried the dd-wrt fermware in my tl-wdr4300 v1 in the past and I didn't like the fact it is losing the 5ghz, so I reverted it to the stock firmware, and now I would like again to try the dd-wrt firmware since I am not happy with the stock firmware, so I have 2 questions before I start, one it is good idea to have both 2.4 and 5ghz with same SSID? Second, I was only able to find r25697 dated 22-12-2014, but I see people using r29519 which I think it is newer version, so where I can find this one?
Thanks in advance for any help,
I resurrected my old tl-wdr4300v1 a few days ago. I reset and installed build r29346 because I read in another post here on the forum someone else was having good results with that build. I’m using the tl-wdr4300-webflash.bin file and not the tl-wdr4300_us-webflash.bin. My tl-wdr4300v1 has been up two days and the wireless has been working perfectly which the exception of the 5ghz LED being out.
My wireless speeds essentially match our wired desktop speeds. I’m seeing a 2ms difference in ping times between my wired and wireless connections which equates to 18ms pings on the desktop and 20ms pings on my laptop with speedtest.net.
As far the SSID names I use similar but different names but that's just me. New and old builds are here ftp://ftp.dd-wrt.com/betas/
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Sat May 21, 2016 10:32 Post subject:
Argorr wrote:
The WiFi dropout have been gone for a bit now. don't recall what version fixed the problem but the new versions have been working quit well lately. I still lose WiFi on the unit but only with large file transfers (2-3gb or larger). I'm suspecting heat is the issue at this point.
the drop just happed on dir-862L latest build, as usual it was during an idle time where all devices were idle for hours. doing a site survey brings the radio broadcasting back..trying beacon int 50 now.. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
As far the SSID names I use similar but different names but that's just me. ...
Me too. I tried the same SSID years ago when I first got my routers but, for troubleshooting, I think I changed because I had so many drops. Turns out the 2.4G radio in the TP-link just doesn't like to play nice. Just never changed back. Works fine. _________________ TP-Link TL-WDR4300 v1 (NAS) - r54682
Buffalo WZR-600DHP (Gateway, NAS, DDNS, DHCP) - r54682
Netgear R7800 (Gateway, DDNS, DHCP, DNSMASQ w/Pi Hole) - r54682
Netgear R7800 (AP) - r54682
