Author
Message
Searay DD-WRT Novice Joined: 22 Sep 2008 Posts: 26
Posted: Sun Aug 26, 2012 5:14 Post subject: Bountiful Bwrg1000
DD-wrt trial is running but with missing wan Mac address and wireless not working.
Is there a way to change macs back to factory thru serial console redboot.
If I can flash the original vxworks boot loader I can take it from there.
Thanks
Back to top
Sponsor
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
Searay DD-WRT Novice Joined: 22 Sep 2008 Posts: 26
Posted: Tue Aug 28, 2012 20:43 Post subject:
lan mac is the same as the original, Wan Mac not the same as original.
Is there a reboot I can load into ram and unlock the flash, then re-flash the vxvorks boot loader?
Thanks
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
Searay DD-WRT Novice Joined: 22 Sep 2008 Posts: 26
Posted: Thu Aug 30, 2012 14:07 Post subject:
MicroRedBoot v1.3, (c) 2009 DD-WRT.COM (Jun 30 2009)
CPU Clock: 184Mhz
Found Flash device SIZE=0x00400000 SECTORSIZE=0x00010000 FLASHBASE=0xBFC00000
DD-WRT NVRAM with size = 17768 found on [0xBFFD0000]
Board: Bountiful BWRG-1000
Reset Button triggered
Booting Recovery RedBoot
loading.....
þ+
"Just hangs here"
It will load the kernel, can something be done through the web interface commands?
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
Searay DD-WRT Novice Joined: 22 Sep 2008 Posts: 26
Posted: Thu Aug 30, 2012 16:53 Post subject:
ddwrt is booting.
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
Searay DD-WRT Novice Joined: 22 Sep 2008 Posts: 26
Posted: Thu Aug 30, 2012 18:50 Post subject:
Sash,
Putty serial connection cannot enter commands router keeps asking for activation code, Telnet will not will not connect to 192.168.1.1 port 9000, I tried the codes u gave in the web interface command box no results.
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
Searay DD-WRT Novice Joined: 22 Sep 2008 Posts: 26
Posted: Thu Aug 30, 2012 22:40 Post subject:
Looks like Jtag time!!
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
Searay DD-WRT Novice Joined: 22 Sep 2008 Posts: 26
Posted: Fri Aug 31, 2012 14:25 Post subject:
Sash,
As I said before this is as far as the redboot gets in the serial console.
*****************************************************
MicroRedBoot v1.3, (c) 2009 DD-WRT.COM (Jun 30 2009)
CPU Clock: 184Mhz
Found Flash device SIZE=0x00400000 SECTORSIZE=0x00010000 FLASHBASE=0xBFC00000
DD-WRT NVRAM with size = 17768 found on [0xBFFD0000]
Board: Bountiful BWRG-1000
Reset Button triggered
Booting Recovery RedBoot
loading.....
þ+
*****************************************************
After this symbol there is no more output, Telnet does not get DD-wrt prompt.
If you say that I’m locked out of the dd-wrt web interface commands because of the trial than it doesn’t seem possible to regain input to redboot.
Back to top