Last shot using the nvrambak.bin of the WRT160NL in the E4200 it works, but after a reboot the router can't boot.
off topic but I had to chime in.
you restored a config backup from an atheros chipset device to a broadcom device. That was not good. I don't think serial will work.. maybe, but I don't think so.
Hi Barryware,
No worries nothing happen and after 30/30/30 returned to live, hehehe
Thanks in any case.
Regards. _________________ 7 x Broadcom BCM5300 chip rev 1 - Asus RT-AC66U ----> v3.0-r31899 giga (04/24/17)
1 x Marvel Armada 385 - LinkSys WRT1900ACS ---------> v3.0-r31899 std (04/24/17)
1 x Marvel Armada 370/XP - LinkSys WRT1900AC -------> v3.0-r31899 std (04/24/17)
1 x QCA IPQ806X - Linksys EA8500 -------------------> v3.0-r31899 std (04/24/17)
1 x Broadcom BCM4709 - Asus RT-AC3200 --------------> v3.0-r30880 std (11/14/16)
1 x ARMv7 Processor rev 0 (v7l) - Asus RT-AC68U ----> v3.0-r30880 std (11/14/16)
1 x ARMv7 Processor rev 0 (v7l) - Linksys EA6900 ---> v3.0-r30880 std (11/14/16)
1 x ARM Cortex-A9 Processor - Net Gear R7000 -------> v3.0-r30880 std (11/14/16)
5 x Broadcom BCM4716 chip rev 1 - Linksys E4200 ----> v24-sp2 (06/07/14) kingkong
1 x Broadcom BCM5300 chip rev 1 - Asus RT-AC66U ----> v24-sp2 (04/01/13) giga
Should I use dd-wrt.v24-20058_NEWD-2_K2.6_mega-RT-N16.trx instead of the generic .bin? _________________ Netgear R7800
DD-WRT v3.0-r51011 std (12/12/22)
FPU emulator disabled, make sure your toolchain was compiled with software floating point support (soft-float)
This message confuses a lot of users. Its just a notice from the Kernel stating that the Kernel FPU emulation is disabled, therfore userspace needs software floating point emulation. The message will appear regardless of whether the toolchain was build with or without soft-float since the Kernel cannot determine this.
Joined: 26 Nov 2008 Posts: 700 Location: Toronto, Canada
Posted: Wed Oct 03, 2012 15:13 Post subject:
Fractal wrote:
I can confirm openvpn working with strongvpn... in this build.. been a long time since it went so smoothly.
-Fractal
OpenVPN not working here...using GUI for config and very simple config at that...only certs and TUN mode...all works up to build 17201 but VPN service does not start on any build after 17201???
Also Netmask is still broken (reverting to 0.0.0.0) How is this working for some but not others?? The only "workaround" is to change to TAP mode and set netmask, then back to TUN mode, but the service still does not start at all regardless of the voodoo I try....using e3000 OpenVPN build
Clearly the GUI is broken in TUN mode and nobody seems to have tested that
I was using SHA256 after SHA1 got broken...now neither work
vpn.JPG
Description:
Filesize:
56.35 KB
Viewed:
14229 Time(s)
_________________
Hardware that works for me:
RT-N66U MerlinWRT 3.0.0.4.374.33_beta3b
E3000 WDS Kong v21661
FPU emulator disabled, make sure your toolchain was compiled with software floating point support (soft-float)
This message confuses a lot of users. Its just a notice from the Kernel stating that the Kernel FPU emulation is disabled, therfore userspace needs software floating point emulation. The message will appear regardless of whether the toolchain was build with or without soft-float since the Kernel cannot determine this.
-Fractal
Did not know what the error exactly meant
Thanks for the explanation.
USB storage for optware isn't working anymore.
For some reasson scripts aren't executing anymore and rc_startup does not finish
Killing pid and restarting ain't working either.
Could this be related to the update in usb drivers?
Dir is accessible r/w and remounting works fine.
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Fri Oct 05, 2012 4:07 Post subject:
Is there any other mirror links or something? This FTP has always been a snail in loading and downloading anything, from multiple ISPs. 110 bytes/sec really... _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
geokilla, it doesn't take a lot of time to search for the link. If you looked in the first post, it states to not ask (or it did at one point).
Fractal, is there any headway being made on SVN 2580? Any insight that you could provide on fixing it? I ask as you were the one that initially got support working for it.
OpenVPN not working here...using GUI for config and very simple config at that...only certs and TUN mode...all works up to build 17201 but VPN service does not start on any build after 17201???
Also Netmask is still broken (reverting to 0.0.0.0) How is this working for some but not others?? The only "workaround" is to change to TAP mode and set netmask, then back to TUN mode, but the service still does not start at all regardless of the voodoo I try....using e3000 OpenVPN build
Clearly the GUI is broken in TUN mode and nobody seems to have tested that
I was using SHA256 after SHA1 got broken...now neither work
Hi Macgyver,
I can confirm your post, from my side I can establish the connection, but nothing working here with: 3 - E4200 one as a server and the other 2 as a client.
I have tried also to test with mobile, laptop and tablet and nothing works with this other devices I can't establish the connection.
Being honest I don't know what is wrong here, but I posted my logs if any one can confirm what is the mistake or fault here... I used the same configuration that was working in the past from my side.
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Fri Oct 05, 2012 11:25 Post subject:
tatsuya46 wrote:
Is there any other mirror links or something? This FTP has always been a snail in loading and downloading anything, from multiple ISPs. 110 bytes/sec really...
yes.. really. I have the anonymous login throttled @ 125KiB for more than one reason. _________________ [Moderator Deleted]
