Hi is it possible to install Transmission torrent with a HDD for downloading torrents on R6300v1.I try 2 days with Wiki tutorial and nothing[http://www.dd-wrt.com/wiki/index.php/Transmission_daemon].I run DD-WRT v24-sp2 (03/23/14) kongac
(SVN revision 23770M)
.Please if someone did it to point me which build and link the tutorial.Thank you very much.[/url]
It's for Netgear R6300 v1, based on DD-WRT 24170. Publish date is 9/27/2014. I've had no issues with it. Both wl0 and wl1 work great. Latency is low and stable, especially 5g.
Flash like any other DD-WRT build: factory reset, upload the file using the web interface, do a 30-30-30 reset.
It's for Netgear R6300 v1, based on DD-WRT 24170. Publish date is 9/27/2014. I've had no issues with it. Both wl0 and wl1 work great. Latency is low and stable, especially 5g.
Flash like any other DD-WRT build: factory reset, upload the file using the web interface, do a 30-30-30 reset.
Then the rest are here ftp://ftp.dd-wrt.com/betas/
Look for your unit and use the .bin files once you have dd-wrt already on it. _________________ I am far from a guru, I'm barely a novice.
Thank you,
is there any particular guide to follow in order to setup the router to achieve full performance? (talking about 5Ghz ecc). Any other place where should i learn more about problems regarding this unit?
Btw could you explain me why i can't directly use the *.chk from the ftp?
Posted: Thu Feb 05, 2015 16:46 Post subject: DD-WRT Firmware for Netgear R6300
I have been running "DD-WRT v24-sp2 (03/23/14) kongac - build 23770M" since May 2014 without any apparent issues. I have two R6300v2 with one as a wireless repeater. With AC, I am seeing 898 MB/s as reported by the Wireless NIC (Netgear A6200).
Are there any specific newer bins that anyone would recommend that have better performance than the one I am currently using?
Posted: Thu Feb 05, 2015 18:48 Post subject: Re: DD-WRT Firmware for Netgear R6300
obiwan- wrote:
I have been running "DD-WRT v24-sp2 (03/23/14) kongac - build 23770M" since May 2014 without any apparent issues. I have two R6300v2 with one as a wireless repeater. With AC, I am seeing 898 MB/s as reported by the Wireless NIC (Netgear A6200).
Are there any specific newer bins that anyone would recommend that have better performance than the one I am currently using?
I've reported my expierence on both those threads with the same hardware as you have.
ps. Balance ^^that^^ with a dose of "if it isn't broke, don't fix it" logic. _________________ reenignE esreveR
Resistance is NOT futile... It's Voltage divided by Current!
Assumptions:
1. Everyone on the forum has read the relevant forum section announcements.
2. For Broadcom section we have ALL at least tried to understand the "Peacock" thread,HERE
Posted: Fri Feb 06, 2015 0:24 Post subject: Low tx rate on wl1
So basically I have 2 R6300 V1, one as a router and one as a repeater bridge to connect a TV and a Raspberry Pi, today I tried to connect them with 5Ghz AC only but the Tx rates are even lower than 2.4Ghz, as you can see on the picture the 2 devices are connected and I get connectivity each way, do you think it is because of the version?