DDWRT on WA830RE v2?

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3 ... 9, 10, 11  Next
Author Message
VertigoS
DD-WRT Novice


Joined: 15 Apr 2013
Posts: 16

PostPosted: Thu May 16, 2013 0:29    Post subject: DDWRT on WA830RE v2? Reply with quote
Hey there, I wanted to ask if there's something I could do about the support for this device. I read the database and it says in need of a board donation. I can't do that but maybe pictures of the board would help as I've seen people posting theirs to get support for other devices.
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Thu May 16, 2013 20:52    Post subject: Reply with quote
http://www.dd-wrt.com/site/support/router-detection
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
VertigoS
DD-WRT Novice


Joined: 15 Apr 2013
Posts: 16

PostPosted: Sat May 18, 2013 1:31    Post subject: Reply with quote
FCC ID: TE7 WA830REV2
RAM: ESMT M13S2561616A = 32MB
SoC: Atheros AR9341 - AL1A
Flash: Spansion FL032PIF = S25FL032P = 4MB

I'm not sure about the flash but that's what I've found Wink
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7647

PostPosted: Mon May 20, 2013 3:51    Post subject: Reply with quote
test build based on WR841NDv8 r21286
VertigoS
DD-WRT Novice


Joined: 15 Apr 2013
Posts: 16

PostPosted: Mon May 20, 2013 14:20    Post subject: Reply with quote
Thnx man. Testing this right away.
VertigoS
DD-WRT Novice


Joined: 15 Apr 2013
Posts: 16

PostPosted: Mon May 20, 2013 21:58    Post subject: Reply with quote
Installed and set-up using this guide http://www.dd-wrt.com/wiki/index.php/Repeater_Bridge
Obviously for atheros and I'm connected to the main router but I'm getting constantly slow-downs without losing connection. Is there a setting I'm missing or is it because of the DDWRT build?
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Tue May 21, 2013 10:16    Post subject: Reply with quote
Code:
dmesg
?
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
VertigoS
DD-WRT Novice


Joined: 15 Apr 2013
Posts: 16

PostPosted: Tue May 21, 2013 15:18    Post subject: Reply with quote
Code:
<6>[45590.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45591.000000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45591.000000] ath0: authenticated
<6>[45591.020000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45591.030000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45591.040000] ath0: associated
<6>[45591.040000] br0: port 3(ath0.1) entered disabled state
<6>[45591.260000] br0: port 3(ath0.1) entered forwarding state
<6>[45591.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45593.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45622.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45622.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45623.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45623.010000] ath0: authenticated
<6>[45623.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45623.040000] br0: port 3(ath0.1) entered disabled state
<6>[45623.040000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45623.050000] ath0: associated
<6>[45623.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45623.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45625.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45654.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45654.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45655.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45655.010000] ath0: authenticated
<6>[45655.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45655.040000] br0: port 3(ath0.1) entered disabled state
<6>[45655.040000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45655.050000] ath0: associated
<6>[45655.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45655.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45657.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45686.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45686.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45687.000000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45687.000000] ath0: authenticated
<6>[45687.020000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45687.030000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45687.040000] ath0: associated
<6>[45687.040000] br0: port 3(ath0.1) entered disabled state
<6>[45687.260000] br0: port 3(ath0.1) entered forwarding state
<6>[45687.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45689.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45718.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45718.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45719.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45719.010000] ath0: authenticated
<6>[45719.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45719.030000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45719.040000] ath0: associated
<6>[45719.050000] br0: port 3(ath0.1) entered disabled state
<6>[45719.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45719.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45721.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45750.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45750.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45751.020000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45751.030000] ath0: authenticated
<6>[45751.040000] br0: port 3(ath0.1) entered disabled state
<6>[45751.040000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45751.050000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45751.060000] ath0: associated
<6>[45751.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45751.280000] br0: port 3(ath0.1) entered forwarding state
<6>[45753.280000] br0: port 3(ath0.1) entered forwarding state
<6>[45782.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45782.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45783.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45783.010000] ath0: authenticated
<6>[45783.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45783.030000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45783.040000] ath0: associated
<6>[45783.050000] br0: port 3(ath0.1) entered disabled state
<6>[45783.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45783.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45785.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45814.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45814.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45815.020000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45815.030000] ath0: authenticated
<6>[45815.040000] br0: port 3(ath0.1) entered disabled state
<6>[45815.040000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45815.050000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45815.060000] ath0: associated
<6>[45815.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45815.280000] br0: port 3(ath0.1) entered forwarding state
<6>[45817.280000] br0: port 3(ath0.1) entered forwarding state
<6>[45846.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45846.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45847.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45847.020000] ath0: authenticated
<6>[45847.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45847.030000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45847.040000] ath0: associated
<6>[45847.050000] br0: port 3(ath0.1) entered disabled state
<6>[45847.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45847.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45849.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45878.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45878.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45879.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45879.010000] ath0: authenticated
<6>[45879.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45879.040000] br0: port 3(ath0.1) entered disabled state
<6>[45879.040000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45879.050000] ath0: associated
<6>[45879.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45879.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45881.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45910.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45910.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45911.000000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45911.000000] ath0: authenticated
<6>[45911.020000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45911.030000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45911.040000] ath0: associated
<6>[45911.040000] br0: port 3(ath0.1) entered disabled state
<6>[45911.260000] br0: port 3(ath0.1) entered forwarding state
<6>[45911.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45913.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45942.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45942.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45943.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45943.010000] ath0: authenticated
<6>[45943.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45943.040000] br0: port 3(ath0.1) entered disabled state
<6>[45943.040000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45943.050000] ath0: associated
<6>[45943.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45943.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45945.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45974.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[45974.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45975.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[45975.010000] ath0: authenticated
<6>[45975.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[45975.030000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[45975.040000] ath0: associated
<6>[45975.050000] br0: port 3(ath0.1) entered disabled state
<6>[45975.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45975.270000] br0: port 3(ath0.1) entered forwarding state
<6>[45977.270000] br0: port 3(ath0.1) entered forwarding state
<6>[46006.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46006.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46007.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46007.010000] ath0: authenticated
<6>[46007.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46007.040000] br0: port 3(ath0.1) entered disabled state
<6>[46007.040000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46007.050000] ath0: associated
<6>[46007.270000] br0: port 3(ath0.1) entered forwarding state
<6>[46007.270000] br0: port 3(ath0.1) entered forwarding state
<6>[46009.270000] br0: port 3(ath0.1) entered forwarding state
<6>[46038.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46038.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46039.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46039.010000] ath0: authenticated
<6>[46039.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46039.030000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46039.040000] ath0: associated
<6>[46039.050000] br0: port 3(ath0.1) entered disabled state
<6>[46039.270000] br0: port 3(ath0.1) entered forwarding state
<6>[46039.270000] br0: port 3(ath0.1) entered forwarding state
<6>[46041.270000] br0: port 3(ath0.1) entered forwarding state
<6>[46070.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46070.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46071.010000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46071.010000] ath0: authenticated
<6>[46071.030000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46071.040000] br0: port 3(ath0.1) entered disabled state
<6>[46071.040000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46071.050000] ath0: associated
<6>[46071.070000] br0: port 3(ath0.1) entered forwarding state
<6>[46071.070000] br0: port 3(ath0.1) entered forwarding state
<6>[46073.070000] br0: port 3(ath0.1) entered forwarding state
<6>[46102.840000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46102.870000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46103.020000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46103.030000] ath0: authenticated
<6>[46103.040000] br0: port 3(ath0.1) entered disabled state
<6>[46103.040000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46103.050000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46103.060000] ath0: associated
<6>[46103.080000] br0: port 3(ath0.1) entered forwarding state
<6>[46103.080000] br0: port 3(ath0.1) entered forwarding state
<6>[46105.080000] br0: port 3(ath0.1) entered forwarding state
<6>[46134.820000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46134.850000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46134.990000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46134.990000] ath0: authenticated
<6>[46135.010000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46135.010000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46135.020000] ath0: associated
<6>[46135.030000] br0: port 3(ath0.1) entered disabled state
<6>[46135.150000] br0: port 3(ath0.1) entered forwarding state
<6>[46135.150000] br0: port 3(ath0.1) entered forwarding state
<6>[46137.150000] br0: port 3(ath0.1) entered forwarding state
<6>[46166.810000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46166.840000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46166.980000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46166.990000] ath0: authenticated
<6>[46167.000000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46167.000000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46167.010000] ath0: associated
<6>[46167.020000] br0: port 3(ath0.1) entered disabled state
<6>[46167.040000] br0: port 3(ath0.1) entered forwarding state
<6>[46167.040000] br0: port 3(ath0.1) entered forwarding state
<6>[46169.040000] br0: port 3(ath0.1) entered forwarding state
<6>[46198.810000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46198.840000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46198.980000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46198.980000] ath0: authenticated
<6>[46199.000000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46199.010000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46199.010000] ath0: associated
<6>[46199.020000] br0: port 3(ath0.1) entered disabled state
<6>[46199.040000] br0: port 3(ath0.1) entered forwarding state
<6>[46199.050000] br0: port 3(ath0.1) entered forwarding state
<6>[46201.050000] br0: port 3(ath0.1) entered forwarding state
<6>[46230.810000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46230.840000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46230.990000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46230.990000] ath0: authenticated
<6>[46231.010000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46231.010000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46231.020000] ath0: associated
<6>[46231.030000] br0: port 3(ath0.1) entered disabled state
<6>[46231.050000] br0: port 3(ath0.1) entered forwarding state
<6>[46231.050000] br0: port 3(ath0.1) entered forwarding state
<6>[46233.050000] br0: port 3(ath0.1) entered forwarding state
<6>[46262.880000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46262.910000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46263.050000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46263.050000] ath0: authenticated
<6>[46263.070000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46263.070000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46263.080000] ath0: associated
<6>[46263.090000] br0: port 3(ath0.1) entered disabled state
<6>[46263.110000] br0: port 3(ath0.1) entered forwarding state
<6>[46263.110000] br0: port 3(ath0.1) entered forwarding state
<6>[46265.110000] br0: port 3(ath0.1) entered forwarding state
<6>[46294.810000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46294.840000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46295.000000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46295.000000] ath0: authenticated
<6>[46295.020000] br0: port 3(ath0.1) entered disabled state
<6>[46295.020000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46295.030000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46295.040000] ath0: associated
<6>[46295.050000] br0: port 3(ath0.1) entered forwarding state
<6>[46295.060000] br0: port 3(ath0.1) entered forwarding state
<6>[46297.060000] br0: port 3(ath0.1) entered forwarding state
<6>[46326.810000] ath0: authenticate with XX:XX:XX:XX:XX:XX
<6>[46326.840000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46326.980000] ath0: send auth to XX:XX:XX:XX:XX:XX (try 2/3)
<6>[46326.980000] ath0: authenticated
<6>[46327.000000] ath0: associate with XX:XX:XX:XX:XX:XX (try 1/3)
<6>[46327.010000] ath0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1)
<6>[46327.010000] ath0: associated
<6>[46327.020000] br0: port 3(ath0.1) entered disabled state
<6>[46327.040000] br0: port 3(ath0.1) entered forwarding state
<6>[46327.050000] br0: port 3(ath0.1) entered forwarding state
<6>[46329.050000] br0: port 3(ath0.1) entered forwarding state
<3>[47471.360000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[48065.870000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[48737.110000] ath: phy0: Failed to stop TX DMA, queues=0x004!


XX:XX:XX:XX:XX:XX = host router MAC
It seems I do get complete connection losses...it just seems the windows update for wifi signal is not fast enough to show this. On my android tablet though I do notice the complete loss of signal.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Thu May 23, 2013 15:37    Post subject: Reply with quote
Code:
ifconfig

brctl show



does the reset button work?

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
VertigoS
DD-WRT Novice


Joined: 15 Apr 2013
Posts: 16

PostPosted: Thu May 23, 2013 16:06    Post subject: Reply with quote
Yes reset button works.

ifconfig:
Code:

ath0      Link encap:Ethernet  HWaddr XX:XX:XX:XX:XX:XX 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4105513 errors:0 dropped:157 overruns:0 frame:0
          TX packets:3118837 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:1523888392 (1.4 GiB)  TX bytes:344534721 (328.5 MiB)
ath0.1    Link encap:Ethernet  HWaddr YY:XX:XX:XX:XX:XX 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1581540 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4152840 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:143446552 (136.8 MiB)  TX bytes:1606935729 (1.4 GiB)
br0       Link encap:Ethernet  HWaddr XX:XX:XX:XX:XX:XX   
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1583343 errors:0 dropped:13687 overruns:0 frame:0
          TX packets:8213315 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:121315810 (115.6 MiB)  TX bytes:11647890031 (10.8 GiB)
br0:0     Link encap:Ethernet  HWaddr XX:XX:XX:XX:XX:XX   
          inet addr:169.254.255.1  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
eth0      Link encap:Ethernet  HWaddr XX:XX:XX:XX:XX:XX   
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:4
eth1      Link encap:Ethernet  HWaddr XX:XX:XX:XX:XX:XX   
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:5
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING MULTICAST  MTU:65536  Metric:1
          RX packets:1270 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1270 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:109220 (106.6 KiB)  TX bytes:109220 (106.6 KiB)


brctl show:
Code:

bridge name   bridge id      STP enabled   interfaces
br0      8000.xxxxxxxxxxxx   no      eth0
                     eth1
                     ath0.1


XX:XX:XX:XX:XX:XX = client MAC
YY:XX:XX:XX:XX:XX = client MAC only first block is "A2" instead of "A0"
xxxxxxxxxxxx = client MAC
VertigoS
DD-WRT Novice


Joined: 15 Apr 2013
Posts: 16

PostPosted: Sat May 25, 2013 22:08    Post subject: Reply with quote
Help please. I don't know what to do.
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7647

PostPosted: Sun May 26, 2013 7:52    Post subject: Reply with quote
Revert to stock file here:

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=757607#757607

Is it only in repeater bridge mode that it is unstable or also when used as an AP or when used as a client?
xcat2008
DD-WRT Novice


Joined: 20 Jun 2013
Posts: 5

PostPosted: Thu Jun 20, 2013 19:38    Post subject: Reply with quote
LOM wrote:
test build based on WR841NDv8 r21286


I installed this version, but should not display the number of Build on menu of the router?

Well, i feel lot's of stability now, not like before....



Is only this, upgrade? So easy? not need do anything more?

Sorry about questions, i'm newbie about Firmwares.

Thanks

Xcat
xcat2008
DD-WRT Novice


Joined: 20 Jun 2013
Posts: 5

PostPosted: Fri Jun 21, 2013 1:06    Post subject: Reply with quote
Sorry my bad, i tried to flash again but by Wireless, and work.

The only problem is connect by "Client Bridge (Router)"...

The router seems to not connect or able to make the Bridge between the other Wireless router..

Or maybe bad settings on my part, but i dbout because i follow one TuTorial by DD-WRT to make those settings for Wireless Bridge...

But after select the Client mode on Wireless, the router not seems work very well, because i lost the connection lot's of times between the Computer and the Exntender, so maybe need's some fix's...

I dont know if this help, but my Extender is this one:






Thank you.
xcat2008
DD-WRT Novice


Joined: 20 Jun 2013
Posts: 5

PostPosted: Sun Jun 23, 2013 3:33    Post subject: Reply with quote
Well seems we dont get a lot of help here....

But ok...

I have now the TP-Link WA830RE working 100% on Client Bridge (Routed), by wireless and Cable work's like a charm.

What i did?

I installed a firmware that is mentioned here, and then I upgraded,the firmware referred here does not work 100%, only the upgrade work's.

Upgrade - http://dd-wrt.com/site/support/other-downloads?path=others%2Feko%2FBrainSlayer-V24-preSP2%2F

Wireless Bridge TuTo - http://www.dd-wrt.com/wiki/index.php/Repeater_Bridge

I will repeat my self again, with the new firmware, the Brigde Mode works like a charm, that not seems on the previous firmware.

Some Pictures:





If someone can test it, would be good Wink


Last edited by xcat2008 on Sun Jun 23, 2013 5:14; edited 1 time in total
Goto page 1, 2, 3 ... 9, 10, 11  Next Display posts from previous:    Page 1 of 11
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum