DD-WRT :: View topic - dd-wrt On a WR941ND V5.0

dd-wrt On a WR941ND V5.0

This topic is locked: you cannot edit posts or make replies.

DD-WRT Forum Index -> Atheros WiSOC based Hardware

Goto page Previous 1, 2, 3, 4, 5 ... 16, 17, 18 Next

View previous topic :: View next topic

Author

Message

abcanw
DD-WRT Novice

Joined: 08 Jul 2013
Posts: 3

Posted: Mon Jul 29, 2013 4:33 Post subject: Re: revert to stock firmware

LOM wrote:

abcanw wrote:

LOM , can u tell me how to revert back to stock tp link firmware

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=765314#765314

LOM , i tried the revert file , but it changed nothing , its still dd-wrt , any help please?

Sponsor

jomarx
DD-WRT Novice

Joined: 02 Aug 2013
Posts: 1

Posted: Fri Aug 02, 2013 6:14 Post subject:
works using the modified version. Cant wait for the updated version.

CoRePuLsE
DD-WRT Novice

Joined: 31 May 2013
Posts: 10

Posted: Fri Aug 02, 2013 11:08 Post subject:

jomarx wrote:

works using the modified version. Cant wait for the updated version.

use the TP-Link TL-WR841ND v8 builds now, i can confirm it's working(running 22118 now)

edit reason:typo

pankajlamsal
DD-WRT Novice

Joined: 07 Aug 2013
Posts: 4

Posted: Wed Aug 07, 2013 3:37 Post subject: problem with Tp link wr-tl 941ND ver 5(new)
It works super fine. But my problem is the range which is significantly dropped while comparing to TP LINK firmware. It's 18 dB. Any idea on firmware for v5 releasing?

pankajlamsal
DD-WRT Novice

Joined: 07 Aug 2013
Posts: 4

Posted: Mon Aug 12, 2013 3:47 Post subject:
Does anybody cares about the forum and reply to it?

pazucca
DD-WRT Novice

Joined: 21 Aug 2013
Posts: 1

Posted: Thu Aug 22, 2013 0:04 Post subject:

LOM wrote:

Here is a header patched factory-to-ddwrt firmware for WR841NDv8 which the WR941NDv5 will accept.

Use the official dd-wrt webflash bin for WR841NDv8 for future updates until the time when WR941NDv5 gets its own builds.

Observe, this is for the "new" v5 only - the "old" v5 which is a v4 should only use v4 builds!

Hi, I´ve read all post looking for the link to download "header patched factory-to-ddwrt firmware for WR841NDv8 which the WR941NDv5 will accept" but I could not find any.
Anyone can help with that, link to firmware needed to flash WR941NDv5 or tell me where to get it?
Thank you very much.
Rgds.

nebbia88
DD-WRT User

Joined: 08 Mar 2010
Posts: 174

Posted: Thu Aug 22, 2013 8:13 Post subject:
LOL, it's on the same post you quoted.. were you logged in? http://www.dd-wrt.com/phpBB2/viewtopic.php?p=763971#763971

nostromox
DD-WRT Novice

Joined: 16 Jun 2006
Posts: 21

Posted: Thu Aug 22, 2013 8:44 Post subject:
Any news about a native version for new 941ND v5?

Ektus
DD-WRT Novice

Joined: 25 Sep 2010
Posts: 10
Location: Germany

Posted: Fri Aug 30, 2013 21:08 Post subject:

LOM wrote:

Tried it, and successfully bricked my router Sad

U-Boot starts the kernel, but it crashes with kernel panic. See last couple of lines in attached log. I've got a serial cable, but was yet unable to interrupt the boot loop.
<edit>got to prompt, typing "tpltpltpltpltpltpl...", so will try to recover tomorrow.</edit>

Regards
Ektus.

Code:

U-Boot 1.1.4 (Jun 8 2013 - 15:28:02)

U-boot AP123

DRAM: 32 MB
Flash Manuf Id 0x1c, DeviceId0 0x30, DeviceId1 0x16
flash size 4MB, sector count = 64
Flash: 4 MB
Using default environment

In: serial
Out: serial
Err: serial
Net: ag934x_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
wasp reset mask:c03300
WASP ----> S27 PHY
file: ag934x.c,line: 189==: set LAN&WAN SWAP. --debug by HouXB
GMAC: cfg1 0x80000000 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
s27 reg init
athrs27_phy_setup ATHR_PHY_CONTROL 4 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :0x10
eth0 up
WASP ----> S27 PHY
file: ag934x.c,line: 189==: set LAN&WAN SWAP. --debug by HouXB
GMAC: cfg1 0xf cfg2 0x7214
eth1: ba:be:fa:ce:08:41
s27 reg init lan
ATHRS27: resetting s27
ATHRS27: s27 reset done
athrs27_phy_setup ATHR_PHY_CONTROL 0 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :0x10
athrs27_phy_setup ATHR_PHY_CONTROL 1 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :0x10
athrs27_phy_setup ATHR_PHY_CONTROL 2 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :0x10
athrs27_phy_setup ATHR_PHY_CONTROL 3 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :0x10
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
Uncompressing Kernel Image ... OK

Starting kernel ...

[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[ 0.000000] cpu srif ddr srif cpu 535 ddr 400 ahb 200
AR9341
detect mem size
Uart Init
Booting WASP !!! -:) ...
[ 0.000000] sys id = 121 Atheros AR9341 rev 1.1 (0x0121)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Linux version 3.9.4 (root@dd-wrt) (gcc version 4.8.1 (OpenWrt/Linaro GCC 4.8-2013.04 r36550) ) #328 Mon May 27 08:33:25 CEST 2013
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 29004k/32768k available (2190k kernel code, 3764k reserved, 419k data, 204k init, 0k highmem)
[ 0.000000] NR_IRQS:80
[ 0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.490000] 25MHZ ref freq
[ 0.510000] bio: create slab <bio-0> at 0
[ 0.520000] Switching to clocksource MIPS
[ 0.520000] NET: Registered protocol family 2
[ 0.530000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.530000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.540000] TCP: Hash tables configured (established 512 bind 512)
[ 0.540000] TCP: reno registered
[ 0.540000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.550000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.560000] NET: Registered protocol family 1
[ 0.560000] gpio_proc: module loaded and /proc/gpio/ created
[ 0.570000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
[ 0.580000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[ 0.580000] msgmni has been set to 56
[ 0.590000] io scheduler noop registered (default)
[ 0.590000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.620000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 0.620000] console [ttyS0] enabled, bootconsole disabled
[ 0.620000] console [ttyS0] enabled, bootconsole disabled
[ 0.640000] guessed flashsize = 4M
[ 0.640000] scanning for root partition
[ 0.640000] tplink uboot detected
[ 0.650000] guessed bootloader size = 20000
[ 0.660000]
[ 0.660000] found squashfs at 110000
[ 0.660000] Creating 8 MTD partitions on "ar7240-nor0":
[ 0.670000] 0x000000000000-0x000000020000 : "RedBoot"
[ 0.670000] 0x000000020000-0x0000003e0000 : "linux"
[ 0.680000] 0x000000110000-0x0000003d0000 : "rootfs"
[ 0.690000] mtd: partition "rootfs" set to be root filesystem
[ 0.690000] 0x0000003d0000-0x0000003e0000 : "ddwrt"
[ 0.700000] 0x0000003e0000-0x0000003f0000 : "nvram"
[ 0.700000] 0x0000003f0000-0x000000400000 : "board_config"
[ 0.710000] 0x000000000000-0x000000400000 : "fullflash"
[ 0.720000] 0x000000000000-0x000000020000 : "fullboot"
[ 0.730000] libphy: Fixed MDIO Bus: probed
[ 0.730000] tun: Universal TUN/TAP device driver, 1.6
[ 0.740000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.740000] PPP generic driver version 2.4.2
[ 0.750000] PPP BSD Compression module registered
[ 0.750000] PPP Deflate Compression module registered
[ 0.760000] PPP MPPE Compression module registered
[ 0.760000] NET: Registered protocol family 24
[ 0.780000] u32 classifier
[ 0.790000] Performance counters on
[ 0.790000] input device check on
[ 0.790000] Actions configured
[ 0.800000] Netfilter messages via NETLINK v0.30.
[ 0.800000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
[ 0.810000] nf_conntrack_rtsp v0.6.21 loading
[ 0.810000] nf_nat_rtsp v0.6.21 loading
[ 0.820000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.820000] TCP: westwood registered
[ 0.830000] TCP: hybla registered
[ 0.830000] TCP: vegas registered
[ 0.830000] NET: Registered protocol family 17
[ 0.840000] Bridge firewalling registered
[ 0.840000] 8021q: 802.1Q VLAN Support v1.8
[ 0.850000] searching for nvram
[ 0.850000] nvram size = 0
[ 0.880000] Broken NVRAM found, recovering it (Magic 55AA030E)
[ 0.890000] Atheros AR71xx hardware watchdog driver version 0.1.0
[ 0.890000] ar71xx-wdt: timeout=15 secs (max=171) ref freq=25000000
[ 0.920000] SQUASHFS error: Unknown inode type 15 in squashfs_iget!
[ 0.920000] List of all partitions:
[ 0.930000] 1f00 128 mtdblock0 (driver?)
[ 0.930000] 1f01 3840 mtdblock1 (driver?)
[ 0.940000] 1f02 2816 mtdblock2 (driver?)
[ 0.940000] 1f03 64 mtdblock3 (driver?)
[ 0.950000] 1f04 64 mtdblock4 (driver?)
[ 0.950000] 1f05 64 mtdblock5 (driver?)
[ 0.960000] 1f06 4096 mtdblock6 (driver?)
[ 0.960000] 1f07 128 mtdblock7 (driver?)
[ 0.970000] No filesystem could mount root, tried: squashfs
[ 0.970000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
[ 0.970000] Rebooting in 1 seconds..

Ektus
DD-WRT Novice

Joined: 25 Sep 2010
Posts: 10
Location: Germany

Posted: Sat Aug 31, 2013 8:53 Post subject: unbrick successfull

I was able to recover from "brick" state using tftp. Tried openwrt this time, and will give that a try.

Case closed.
Ektus.

Code:

wasp> tftp 0x80000000 tl-wr941nd_v5.0.bin
Using eth1 device
TFTP from server 192.168.1.100; our IP address is 192.168.1.111
Filename 'tl-wr941nd_v5.0.bin'.
Load address: 0x80000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######################################################
done
Bytes transferred = 3932160 (3c0000 hex)
wasp> erase.b 0x9f020000 +0x3c0000

First 0x2 last 0x3d sector size 0x10000
61
Erased 60 sectors
wasp> cp.b 0x80000000 0x9f020000 0x3c0000
Copy to Flash... write addr: 9f020000
done
wasp> reset

U-Boot 1.1.4 (Jun 8 2013 - 15:28:02)

U-boot AP123

DRAM: 32 MB
Flash Manuf Id 0x1c, DeviceId0 0x30, DeviceId1 0x16
flash size 4MB, sector count = 64
Flash: 4 MB
Using default environment

In: serial
Out: serial
Err: serial
Net: ag934x_enet_initialize...

rribeirorj
DD-WRT Novice

Joined: 31 Aug 2013
Posts: 1

Posted: Sat Aug 31, 2013 20:58 Post subject:
Hello All I have a WR941ND v5 with AR9341 How can i use WR841DN v8 factory? Because i have downloaded and can´t update, with error 18005. LOM, have another factory to use? And whats webflash use ? 841 v8? Do u know how many time DD-WRT make an official version for WR941ND v5 with AR9341? Thanks

CoRePuLsE
DD-WRT Novice

Joined: 31 May 2013
Posts: 10

Posted: Sun Sep 01, 2013 11:07 Post subject:

rribeirorj wrote:

Hello All

I have a WR941ND v5 with AR9341

How can i use WR841DN v8 factory?
Because i have downloaded and can´t update, with error 18005.

LOM, have another factory to use? And whats webflash use ? 841 v8?

Do u know how many time DD-WRT make an official version for WR941ND v5 with AR9341?

Thanks

First you need to install the file in this thread and only -after- that you can update to WR841 v8 builds

canolucas
DD-WRT Novice

Joined: 22 Sep 2013
Posts: 2

Posted: Sun Sep 22, 2013 16:44 Post subject: Support request got just submited

LOM wrote:

I created a ticket telling the devs that the new firmware is needed. please feel free to add any missing information to it.

Here is the link:
http://svn.dd-wrt.com/ticket/3003

Hope this issue get tracked down.

Thank you very much in advance.

bnikolov
DD-WRT Novice

Joined: 04 Oct 2013
Posts: 1
Location: University of Ruse, BG

Posted: Fri Oct 04, 2013 21:13 Post subject:
It works super fine. Thank you LOM! PPTP client work properly for now.

smackey
DD-WRT Novice

Joined: 13 Oct 2013
Posts: 1

Posted: Sun Oct 13, 2013 6:40 Post subject:
posting for link..... how lame am I.

Goto page Previous 1, 2, 3, 4, 5 ... 16, 17, 18 Next

Display posts from previous:

Page 4 of 18

DD-WRT Forum Index -> Atheros WiSOC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

dd-wrt On a WR941ND V5.0

Quick Links

Log in