hey tbudicin, is there a way you can tell if all 3 antennas get activated by this firmware?
coz, as far as I know, wr841 has only two antennas.
Thank you very much in advance.
hi canolucas,
i'm not sure about what i'm saying,
but when I configured the wr941 nd v5.1 with wr841 ddwrt,
in settings panel I saw only 1+2 antennas active, but through shell commands (iw) etc, it seemed to me that it was working 1+2+3 antennas.
Posted: Thu May 29, 2014 12:57 Post subject: Re: wr941/wr841
morfeus666 wrote:
Hello everyone, I would like to know if you ever come out for a final vaersione wr941 nd v5.1 or will always be the one for wr841?
look for your answer
Thank you all in advance
+1
It's not stable to crossflash into 841 and update with the latest updates. LAN activity simply crashes after a few hours. You should use r23919 version instead, as this version is at least stable.
Posted: Thu May 29, 2014 20:11 Post subject: Re: wr941/wr841
thanks my friend..
kulica64 wrote:
morfeus666 wrote:
Hello everyone, I would like to know if you ever come out for a final vaersione wr941 nd v5.1 or will always be the one for wr841?
look for your answer
Thank you all in advance
+1
It's not stable to crossflash into 841 and update with the latest updates. LAN activity simply crashes after a few hours. You should use r23919 version instead, as this version is at least stable.
Posted: Thu Jun 19, 2014 3:21 Post subject: The new one problem
It's the first one problem.
LAN ports (at least 3 and 4) do not see each other (ping gives "host unreachable"). But ping passed to both hosts from router itself. Iptables rule exist:
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
122 3904 ACCEPT 0 -- br0 * 0.0.0.0/0 0.0.0.0/0
VLAN seems to be ok.
vlan1 included ath0 eth1
P.S.
SOLVED by disable SPI Firewall and setting iptables manually.
Last edited by Henry White on Thu Jun 26, 2014 9:03; edited 1 time in total
Result: solid brick, currently good enough to throw at things. Only the Power light turns on. When RESET is held, eventually the WPS and finally all the lights turn on, when RESET is released, nothing... does not answer to DHCP.
Will open the case and try to find where the serial lines are.
