Posted: Wed Jul 18, 2007 5:12 Post subject: HOW DO I RESTORE MY ROUTER TO FACTORY FIRMWARE?
I am having some issues with getting my DSL modem to talk to my ddwrt router. I wanted to restore it back to factory settings to see if that clears it up. Dose anyone know how to reverse the ddwrt process to get the linksys firmware back in just like when you buy it new?
Joined: 17 Jun 2007 Posts: 100 Location: China, Suzhou
Posted: Wed Jul 18, 2007 9:25 Post subject:
I think to answer this more information is required, right!? _________________ Buffalo WHR-G54S, Generic Broadcom V2.4 Beta 2007-08-15, SD/MMC mod(2 GByte).
Buffalo WHR-HP-G54, Generic Broadcom V2.4 2007-08-15 SD/MMC mod(1 GByte).
Joined: 07 Jun 2006 Posts: 1488 Location: the Netherlands
Posted: Wed Jul 18, 2007 12:18 Post subject:
First, I think you CAPS was stuck or something. A topic title in all caps ain't helping
A little search wouldn't hurt either.
If you're using a linksys or buffallo you can flash back just by flashing the file through the web-interface unless you're using > v5, then you must flash back the vxworks shit (see downloads for instructions).
Posted: Wed Jul 18, 2007 18:45 Post subject: vxworks
ok i found vxworks like you said in the download section but which one do I use there are different ones? Can i flash it with just eithernet cable or do i have to have tftp too?
Joined: 09 Aug 2006 Posts: 1103 Location: Surabaya, Indonesia
Posted: Thu Jul 19, 2007 4:02 Post subject: Re: vxworks
joshuai371p wrote:
ok i found vxworks like you said in the download section but which one do I use there are different ones? Can i flash it with just eithernet cable or do i have to have tftp too?
never try flash all firmware via wireless !!!...can make your router bricked. flash with tftp or GUI just use cable for safely. _________________ 365'pc WRT54GL 1.1 + DD-WRT wds - client mode - client bridge
337 GL+DD-WRT v23 SP1 Std
28 GL+DD-WRT v23 SP3 Std
13 WRT300N v.1 v24 06-20-07
2 GL/SP1/200 mW+Hyperlink 24 db >> 16 km Point to Point