You can. I don't have the commands to do it on hand but it is possible. If you just want to assign the WAN port to the switch, then once you disable WAN on the Basic Settings page, a new checkbox option will appear on the page to do just that. _________________ WRT54G v2.0 (Bridge)
WRT54GL v1.0 (Bridge) (x3)
WRT54GS v3.0 (Routing)
WL520gU (Routing)
Running DD-WRT v24 SP2 - http://www.dd-wrt.com
Actually, I don't want to make the WAN port part of the switch. I just want to be able to put the WAN port on VLAN0 instead of VLAN1 and the each of the four remaining ports on VLAN1 through VLAN4.
WAN : VLAN0
Port 1 : VLAN1
Port 2 : VLAN2
Port 3 : VLAN3
Port 4 : VLAN4