[dima8389]

WRT-54GL v1.1 did not reboot automatically after upgrade.

[AlwaysConnected]

you can solve this
before upgraden
enter telnet 192.168.1.1
login
enter reboot
wait few sec
open browser and upgrade

[dellsweig]

Dumb question

Where can I get the daily RC4 build??


Never mind - found it!!!!!

Dan

[Obi-DDWRT]

the same problem in all v24 micro versions

dhcp release and dhcp renew buttons pressed, and the same result, a blank page with this url

h**p://routerIP/apply.cgi

and no release and no renew actions

yes, cleared browser cache, and nothing

another question ... I've read in other post from the Tomato project that there is an option to avoid some ISP that limit the p2p traffic, as emule offers in his last versions with obfuscated packets, related to TTL control ... is it possible to be integrated in DD-WRT project??

Good luck with next RC versions, but I will go back to v23 if these bug persist

Obi-Wan

[dellsweig]

Just flashed my entire environment to RC4 Beta 9/21

Main AP
3 WDS Nodes
Repeater

Everything looks great - no issues except the following

logging:

I have logging enabled to syslog on my main AP. I also have 2 Access lists defined with some protocol specific filtering.

After a reboot, logging does not work. If I disable access list 1, logging starts. I then re-enable access list 1 and logging continues to work

A reboot causes logging to stop

Keep up the GREAT work

Dan

[jsmiddleton4]

Small think I know but the brainslayer appearance package still has problem with the menu on the left side spacing on Admin tab, maybe others.

[cyberde]

Yes router didn't reboot... And cron still doesn't work But hey, they're really working on it

[Vins]

Same problem than in previous versions:
Scripts in Commands are not working (Micro generic version)

[HowardZ]

Sorry, I just think the naming convention is getting pretty silly.

If you really hate the idea of releasing an RC4, then
how about naming it RC3.001 ?
This will give you 999 versions before RC4.

[sarcher]

It's official. v24 pre-RC4 micro generic, like every other v24 build, crashes with the load going to 100% (while doing nothing) after 37 hours. I would think that it could just be my WRT54Gv6, but v23 SP3 7-21-07 ran flawlessly for 6 days before I loaded v24.

Access restrictions (by time, anyway) do not work in v24 pre-RC4.

On the plus side, Bandwidth monitor in pre-RC4 works fine with Safari beta 3.03.

[ovd.]

when i reboot or upgrade my Buffalo WHR-HP-G54 router i get a blank page with this address

h**p://10.0.0.1/apply.cgi
h**p://10.0.0.1/upgrade.cgi

[nemesisdb]

[cyberde]

I have to add another comment to the bandwidth tabs as well. It works in 32bit windows with IE6, but not in Windows XP x64 not even after a fresh install. I get the folowing error:

[slavko]

DD-WRT v24 std (c) 2007 NewMedia-NET GmbH
Release: 09/21/07 (SVN revision: 8000)
root@192.168.24.2's password:
==========================================================

____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|

DD-WRT v24
http://www.dd-wrt.com

==========================================================


BusyBox v1.4.2 (2007-09-21 08:14:11 CEST) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ #
~ # ipkg install libgcc

Downloading http://downloads.openwrt.org/whiterussian/packages/base-files_9_mips
el.ipk ...
Connecting to downloads.openwrt.org [195.56.146.238:80]
Done.
Unpacking base-files...Done.
Configuring base-files...Done.

Downloading http://downloads.openwrt.org/whiterussian/packages/libgcc_3.4.4-9_mi
psel.ipk ...
Connecting to downloads.openwrt.org [195.56.146.238:80]
Done.
ipkg_install_file: ERROR: libgcc depends on the following uninstalled programs:
base-files
ipkg_install_file: You may want to use `ipkg install' to install these.
ipkg_get_install: ERROR: Failed to install /jffs/tmp/ipkg/libgcc_3.4.4-9_mipsel.
ipk
ipkg_get_install: I'll leave it there for you to try a manual installation
~ #

[slavko]

/ # ipkg install kmod-usb-core
ipkg_depends: Warning: kernel mentioned in dependency but no package found in /j
ffs/usr/lib/ipkg/lists

Downloading http://downloads.openwrt.org/whiterussian/packages/kmod-usb-core_2.4
.30-brcm-5_mipsel.ipk ...
Connecting to downloads.openwrt.org [195.56.146.238:80]
Done.
ipkg_depends: Warning: kernel mentioned in dependency but no package found in /j
ffs/usr/lib/ipkg/lists
Unpacking kmod-usb-core...Done.
Configuring kmod-usb-core...Done.
/ # uname -a
Linux routerw 2.4.35 #2300 Fri Sep 21 08:18:11 CEST 2007 mips unknown