semi-bricked mine with openvpn 9334 knew I should have avoided it tftp tranfers go through, when tftped with original netgear bin leds go back to normal temporarily, but router is inaccessible, and upon reboot is back to flashing power led help would be appreciated, luckily this is not my only router, so no emergency but any tips would be great.
Ok I figured it out tftped file must be in .chk format or else it won't work. Flashed with 9334 STD and everything appears to be working now. thanks Eko
Joined: 08 Mar 2008 Posts: 239 Location: Wayne, PA
Posted: Thu Mar 27, 2008 15:22 Post subject:
brispet1 wrote:
semi-bricked mine with openvpn 9334 knew I should have avoided it tftp tranfers go through, when tftped with original netgear bin leds go back to normal temporarily, but router is inaccessible, and upon reboot is back to flashing power led help would be appreciated, luckily this is not my only router, so no emergency but any tips would be great.
I just de-semi-bricked mine too....
Now to wait until OpenVPN is running, and then I'll be a happy camper !
yes me too (std) - but openvpn version of same build number is not working ...
Ditto on std build (DD-WRT v24 RC-7 (03/26/0 std - build 9346M Eko) working. Open VPN doesn't work (though TFTP does bring it back so it's not "bricked" per se )
damn, i cant "enter" to my router, it ask me about login and password, so im typing as on back of router: "admin" and "password" and nothing.... and thats only if im using 192.168.1.1 (with www.routerlogin.net nothing happen)
Joined: 08 Mar 2008 Posts: 239 Location: Wayne, PA
Posted: Tue Apr 01, 2008 0:00 Post subject:
JurQ wrote:
damn, i cant "enter" to my router, it ask me about login and password, so im typing as on back of router: "admin" and "password" and nothing.... and thats only if im using 192.168.1.1 (with www.routerlogin.net nothing happen)
Try "root" and "admin" (without the quotes)....that's the DD-WRT default.
Joined: 08 Mar 2008 Posts: 239 Location: Wayne, PA
Posted: Tue Apr 01, 2008 1:51 Post subject:
JurQ wrote:
ok im in, i had to disable my wireless internet, but when i try to upgrade i have "upgrading failed" (either std 9346, mini 9344 or micro 9344)
btw: to upgrade via web gui i need a .bin ???
Yes, you need a .bin to do the upgrade, and Yes, the upgrade will work wirelessly as well as wired.
It's no surprise that you needed to disable your wireless to TFTP, since your wireless card probably also had a 192.168.x.y address.
For the upgrade, make sure you are going to the right place. From the main downloads page, go to "others" then "eko" then "RC7-9346" then "dd-wrt.v24-9346_NEWD_std.bin" That should do the trick for you.
Good luck !
jas
p.s. Don't try the openvpn.bin file yet, as it will semi-brick the router and require a TFTP flash with a working .bin file to resuscitate it.
thanks Eko
std - build 9346M Eko) working. Open VPN doesn't work (though TFTP does bring it back so it's not "bricked" per se 
)