Can confirm as well, been using it for a week or less, but it has been smooth, however I haven't really changed much of the settings except the wireless name and password.
Posted: Sun Jul 26, 2015 16:53 Post subject: Lan ports not comunicating
First of all, I want to thanks all the ones that work hard to deliver to the community such a good and handy tool has the dd-wrt project.
Now I installed the last BETA, and was working just fine, @ 300mbps with the 40mhz option and so on, everything looked just fine.
So I've try to connect another computer on 2nd port of my WR841 (the 1st one is the one that comes from the router, I'm using the device has an AP). Normally and has far I can remember the 2nd computer should work just fine, I don't remember to have to change some configuration to the device continue to act like a switch on the 4 ports. More strange was when I've connected that computer to the WAN port (that I have assign to the switch) the computer have normal connection.
So I'm missing some bridge configuration, for the switch part to work? If so I don't remember to do it before, so it's just for this device/fw?
Posted: Mon Jul 27, 2015 0:55 Post subject: Re: Lan ports not comunicating
vyrushack wrote:
First of all, I want to thanks all the ones that work hard to deliver to the community such a good and handy tool has the dd-wrt project.
Now I installed the last BETA, and was working just fine, @ 300mbps with the 40mhz option and so on, everything looked just fine.
So I've try to connect another computer on 2nd port of my WR841 (the 1st one is the one that comes from the router, I'm using the device has an AP). Normally and has far I can remember the 2nd computer should work just fine, I don't remember to have to change some configuration to the device continue to act like a switch on the 4 ports. More strange was when I've connected that computer to the WAN port (that I have assign to the switch) the computer have normal connection.
So I'm missing some bridge configuration, for the switch part to work? If so I don't remember to do it before, so it's just for this device/fw?
Thanks in advance,
Best regards,
Put these commands into startup and reboot:
swconfig dev eth0 set enable_vlan 1
swconfig dev eth0 set apply
Posted: Sun Aug 02, 2015 15:28 Post subject: Re: Lan ports not comunicating
Geek30 wrote:
Put these commands into startup and reboot:
swconfig dev eth0 set enable_vlan 1
swconfig dev eth0 set apply
This worked for me.
Thank you! These commands solved my problem as well.
I opened a ticket in svn: http://svn.dd-wrt.com/ticket/4775#no3
Let's hope BS take a look into it.
[]'s _________________ TPlink TL-WDR3600ND as WDS AP
TPlink TL-WR841ND v9 as WDS Station
TPlink TL-WR1043ND v1.8 as WDS Station (with VAP disabled)
I keep trying to upgrade to r27506 via the web interface, being told that the update was successful, only to find that my build number hasn't actually changed. Anyone know how to fix that?
For reference, I did a 30/30/30 factory reset before flashing and I've tried doing it form chrome and from firefox. My router model is as follows:
Router Model TP-Link TL-WR841ND v9
Firmware Version DD-WRT v24-sp2 (06/23/14) - build 24461
Kernel Version Linux 3.10.44 #11019 Mon Jun 23 09:53:27 CEST 2014 mips
Posted: Mon Aug 03, 2015 19:05 Post subject: WR841N filename
What do you rename the .bin file in order to flash the router first time? It doesn't like my choices. The last TP-Link bin I had was named, wr841nv9_wr841ndv9_en_3_16_9_up_boot(150310)
Joined: 28 Jun 2011 Posts: 580 Location: Vilnius, Lithuania
Posted: Mon Aug 03, 2015 19:18 Post subject:
Xtiro wrote:
Firmware Version DD-WRT v24-sp2 (06/23/14) - build 24461
This and 24460 builds have a bug. You have to update via telnet or ssh. Webupdrade does not work _________________ [Ramips] Nexx WT3020F Openwrt @kernel #4.14.167 (OpenVPN server, Wireguard server, AD blocking, SQM QOS, USB)
I keep trying to upgrade to r27506 via the web interface, being told that the update was successful, only to find that my build number hasn't actually changed. Anyone know how to fix that?
For reference, I did a 30/30/30 factory reset before flashing and I've tried doing it form chrome and from firefox. My router model is as follows:
Router Model TP-Link TL-WR841ND v9
Firmware Version DD-WRT v24-sp2 (06/23/14) - build 24461
Kernel Version Linux 3.10.44 #11019 Mon Jun 23 09:53:27 CEST 2014 mips
welll ... it is working for 90% of time and stuff you need but when you put a load on the wifi it brakes with packets missing and for example streaming tryes to reconnect a few times and then brakes the connection. no problem what so ever on full 20 .... tested it day and night works perfect. put to 40 and every time a problem in stream
