Posted: Sun Jul 06, 2014 12:15 Post subject: Problem with Client Mode
Hi
I have a TP-Link TL-WR1043ND with DD-WRT v24SP2- (03/25/13) std - build 21061. I have configured it in the Client Mode to my WiFi conenction. When I boot it, then the Connection to the Network/Internet works for about 30seconds. After that I only can Access the TL-WR1043ND, but nothing outside of the TL-WR1043ND. From a Device directly connected to the WiFi can't access to the Webinterface of the TL-WR1043ND too. When I disconnect the LAN Connection to the TL-WR1043ND and connect it again the Connection works again for about 30Seconds and then it didn't work again. I don't have any Idea where teh Problem is.
Joined: 04 Nov 2012 Posts: 525 Location: Acapulco, Mexico
Posted: Sun Jul 06, 2014 15:38 Post subject:
Use Client Bridge (routed) guide here http://www.dd-wrt.com/wiki/index.php/Repeater_Bridge
Browse down to Atheros
start here 6. Open the Wireless -> Basic Settings tab
1. Physical Interface Section
Wireless Mode : Client Bridge (routed)
Note: after this step click save wait 15 secs. and continue _________________ TP-Link: TL-WR741ND V4
TP-Link: TL-WR842ND V2