ftp://tplink-forum.pl/orgin_bez_boot/
some are in Polish others in EN language, thats no problem, after flash to stock upgrade to latest TL FW from their web, the word firmware in Polish its similar in EN, and always last menu on left is System Tools and third line is firmware upgrade, if you use Chrome browser it will translate automatic _________________ TP-Link: TL-WR741ND V4
TP-Link: TL-WR842ND V2
Thanks. For some reason the router just ignores the file after uploading via web interface
danymarc wrote:
syfax wrote:
Is there a revert file for WR842NDv2?
ftp://tplink-forum.pl/orgin_bez_boot/
some are in Polish others in EN language, thats no problem, after flash to stock upgrade to latest TL FW from their web, the word firmware in Polish its similar in EN, and always last menu on left is System Tools and third line is firmware upgrade, if you use Chrome browser it will translate automatic
Joined: 04 Nov 2012 Posts: 525 Location: Acapulco, Mexico
Posted: Tue Jul 08, 2014 20:58 Post subject:
You will have to flash via WinScp and before enable the ssh daemon (service)? If not, SSH administration will be greyed out and disabled. You need to enable both the service and the administration.
C/P from Omiez post from Gargoyle forum
Upload the file using Winscp in the /tmp folder of your router.
Connect with Putty and give this commands:
cd /tmp
mtd -r write /tmp/tplink.bin firmware
Every command at once hitting Enter.
If it is not the last version just upgrade normally after flashing this one.
Note: _________________ TP-Link: TL-WR741ND V4
TP-Link: TL-WR842ND V2
You will have to flash via WinScp and before enable the ssh daemon (service)? If not, SSH administration will be greyed out and disabled. You need to enable both the service and the administration.
C/P from Omiez post from Gargoyle forum
Upload the file using Winscp in the /tmp folder of your router.
Connect with Putty and give this commands:
cd /tmp
mtd -r write /tmp/tplink.bin firmware
Every command at once hitting Enter.
If it is not the last version just upgrade normally after flashing this one.
Note:
Joined: 04 Nov 2012 Posts: 525 Location: Acapulco, Mexico
Posted: Thu Jul 31, 2014 23:51 Post subject:
liviumac wrote:
funny thing happened: last night I switched off the router with the dd-wrt interface in my browser, today when I switched it on I had the stock FW
so anyway, the above procedure works
thank you