[ConnorM]

Hi, i have put DD-WRT Micro on my WRT54G2 V1(DD-WRT v24-sp2 (10/30/08 ) micro (SVN revision 10709M NEWD Eko).

i do not want to use it as router, or i would have left stock FW.

i currently have 1 router (ubiquiti egderouter lite) and routers acting as 2 AP's (RT-AC66U running Tomato Shibby 1.28, D-Link DIR-655 Running stock FW 2.11)

if i use WRT54G2 with DD-WRT in AP mode, all is fine, works 100%, everything i need and expect.

if i use radio in "Client Bridge" mode it works properly, but i have some problem

i can connect to internet, my d-link ap, my router, all computers.

i CANT connect to my RT-AC66U........

in AP mode i can connect to it.

i have to connect to it because NAS is on it.

also i wanna figure this problem out.

why can i not connect to my RT-AC66U running tomato shibby? do DD-WRT and Tomato hate eachother? XD lol

also i have no upgraded FW, as i did not want to mess anything up

the FW in the router database looks a bit newer?

Micro Generic dd-wrt.v24_micro_generic.bin 2009-10-10 1,68 MB

my current FW is 1.62MB..

if i flash it, factory reset then flash from dd-wrt admin fw upgrade section?

thank you.

hmmmmmm, i can ping my asus router from the wrt54g2 but not from my computer behind it, why?


\u@\h:\w\$ ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes
64 bytes from 192.168.1.2: seq=0 ttl=64 time=3.334 ms
64 bytes from 192.168.1.2: seq=1 ttl=64 time=1.371 ms
64 bytes from 192.168.1.2: seq=2 ttl=64 time=1.403 ms
64 bytes from 192.168.1.2: seq=3 ttl=64 time=1.477 ms
64 bytes from 192.168.1.2: seq=4 ttl=64 time=1.429 ms
64 bytes from 192.168.1.2: seq=5 ttl=64 time=1.535 ms

--- 192.168.1.2 ping statistics ---
6 packets transmitted, 6 packets received, 0% packet loss
round-trip min/avg/max = 1.371/1.758/3.334 ms
\u@\h:\w\$

[Murrkf]

See the first post in this forum, the wiki on linking router, sll four broadcom forum announcements, and post in the proper forum for the router you need assistance with...the g2.