[kradardsai]

I have followed http://www.dd-wrt.com/wiki/index.php/OpenVPN_-_Site-to-Site_Bridged_VPN_Between_Two_Routers, and both networks can ping each other, do file sharing.

After a month, I installed fingerprint scanner and connected to a network (server side) using wire. The fingerprint client software is installed on client side. Both sides can connect to Internet using WAN port. The fingerprint client software cannot find the fingerprint scanner, but computers can ping that fingerprint scanner and vice versa. It can find the fingerprint scanner when I go to "Advanced Routing" -> Mode = Router, then add the following info.

Destination : 192.168.1.225
Mask : 255.255.255.255
Gateway : 192.168.1.30

After adding the above info, I could not access this router (client side) from the Internet (WAN). It is necessary to access from Internet to this router (client side). Could you please help me about this?

Network info;
server side : 192.168.1.0/24 gw 192.168.1.30 DHCP Range 192.168.1.31 - 70

Client side : 192.168.1.0/24 gw 192.168.1.81 DHCP Range 192.168.1.82 - 100

Fingerprint scanner IP 192.168.1.225

Fingerprint client software installed on computer IP 192.168.1.99 (Client side)

[Per Yngve Berg]

Have you set up vpn using the tap interface?

tap is for bridging, tun for routing.