New kongac build 24865M available:(Update):build 25000M out

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5, 6, 7  Next
View previous topic :: View next topic  
Author Message
s-f-r-j
DD-WRT User


Joined: 27 Sep 2011
Posts: 236
PostPosted: Fri Aug 15, 2014 20:08    Post subject: Reply with quote
*in order to get the changed params without a reset run the following params in telnet or ssh session:

nvram set wl0_frameburst=on
nvram set wl1_frameburst=on
nvram set wl0_assoc_retry_max=20
nvram set wl1_assoc_retry_max=20
nvram commit
reboot

Does this mean that factory reset from (SVN revision 24800M) is not required with above commands?

Thanks
Back to top View user's profile Send private message
Sponsor
code65536
DD-WRT User


Joined: 28 Dec 2011
Posts: 100
Location: .us
PostPosted: Fri Aug 15, 2014 20:47    Post subject: Reply with quote
I think the new TPC/DFS settings are applicable only if you're using DFS channels.

http://en.wikipedia.org/wiki/IEEE_802.11h-2003

You can see the list of DFS channels here:
http://en.wikipedia.org/wiki/List_of_WLAN_channels

There are many devices (phones, especially) that don't support DFS and can't see the DFS channels (this is why the Asus stock firmware doesn't even let you select a DFS channel).
_________________
Buffalo WZR-1750DHP: 34311
TRENDnet TEW-673GRU: 34311
TRENDnet TEW-811DRU: 33986
Back to top View user's profile Send private message
SimonB79
DD-WRT User


Joined: 02 Aug 2014
Posts: 52
PostPosted: Fri Aug 15, 2014 21:57    Post subject: Reply with quote
s-f-r-j wrote:
*in order to get the changed params without a reset run the following params in telnet or ssh session:

nvram set wl0_frameburst=on
nvram set wl1_frameburst=on
nvram set wl0_assoc_retry_max=20
nvram set wl1_assoc_retry_max=20
nvram commit
reboot

Does this mean that factory reset from (SVN revision 24800M) is not required with above commands?

Thanks


Just updated & copy / pasted the above into the command menu! ... Router rebooted & everything seems fine! Smile

(Didn't have that ip4 problem either!!!) Cool
Back to top View user's profile Send private message
s-f-r-j
DD-WRT User


Joined: 27 Sep 2011
Posts: 236
PostPosted: Fri Aug 15, 2014 22:00    Post subject: Reply with quote
I've tried this version, and for some reason i wasnt able to connect to any VPN network from 3 different PCs.

Error 619.

I do have custom ipv6 (6rd) script running from jffs, and looks like for some reason firewall was blocking it.

I tried to disable it, issue was there.

Back to previous version, all fine.
Back to top View user's profile Send private message
kiwiis
DD-WRT Novice


Joined: 09 Aug 2014
Posts: 11
PostPosted: Sat Aug 16, 2014 0:31    Post subject: Reply with quote
Curious as well what the new regulatory domain TPC settings are about. They're off by default..
Back to top View user's profile Send private message
arfarf
DD-WRT Novice


Joined: 17 Jul 2014
Posts: 3
PostPosted: Sat Aug 16, 2014 1:12    Post subject: Reply with quote
updated to this version. applied the nvram changes.

seems like this version of dnsmasq broke things. I can do nslookup locally and on a laptop but all browsers broken.

reverting to 24710M fixed things.

also if you have option 42 set in dnsmasq to a hostname, this will break with this version
Back to top View user's profile Send private message
negativzero
DD-WRT Novice


Joined: 29 Nov 2013
Posts: 12
PostPosted: Sat Aug 16, 2014 1:47    Post subject: Reply with quote
HW Nat is broken on the AC68U, no internet connection at all. Had to revert back to 24800. Anyone having problems with HW Nat??
Back to top View user's profile Send private message
stoney li
DD-WRT User


Joined: 12 Apr 2013
Posts: 248
PostPosted: Sat Aug 16, 2014 2:49    Post subject: Reply with quote
negativzero wrote:
HW Nat is broken on the AC68U, no internet connection at all. Had to revert back to 24800. Anyone having problems with HW Nat??


I had the same issue. After enable HW NAT on AC68R, there was no internet for both wired and wireless connection. I am running the router with HW NAT disabled 24865M.
Back to top View user's profile Send private message
stoney li
DD-WRT User


Joined: 12 Apr 2013
Posts: 248
PostPosted: Sat Aug 16, 2014 2:58    Post subject: Reply with quote
Acutually HW NAT works but FOR guest network. After I enabled HW NAT on AC68, only when connecting the guest wifi, the client get internet access.

stoney li wrote:
negativzero wrote:
HW Nat is broken on the AC68U, no internet connection at all. Had to revert back to 24800. Anyone having problems with HW Nat??


I had the same issue. After enable HW NAT on AC68R, there was no internet for both wired and wireless connection. I am running the router with HW NAT disabled 24865M.
Back to top View user's profile Send private message
bcmalloy
DD-WRT User


Joined: 30 Jul 2011
Posts: 55
PostPosted: Sat Aug 16, 2014 5:02    Post subject: Reply with quote
wheres this fancy hw nat option?
Back to top View user's profile Send private message
stoney li
DD-WRT User


Joined: 12 Apr 2013
Posts: 248
PostPosted: Sat Aug 16, 2014 5:11    Post subject: Reply with quote
setup --> basic setup --> Optional Settings
Back to top View user's profile Send private message
bcmalloy
DD-WRT User


Joined: 30 Jul 2011
Posts: 55
PostPosted: Sat Aug 16, 2014 5:58    Post subject: tested with dlink 868l Reply with quote
thanks
tested with Dlink 868l
1.Works great
2.Wireless speed as fast as stock
3.Hardware NAT works fine (note takes a while to apply setting)
4.Using WAN in PPPOE mode and google dns's using dns cacheing cache-size=5000

Clients are some android phones a mac and 3 other machines all is well.

Will report back in 5 days unless another build is released.. Wink Seems to be some issues with upnp and nat hw acceleration - reverted to 24345M OLDD working great

Last edited by bcmalloy on Fri Aug 22, 2014 7:01; edited 1 time in total
Back to top View user's profile Send private message
SimonB79
DD-WRT User


Joined: 02 Aug 2014
Posts: 52
PostPosted: Sat Aug 16, 2014 8:12    Post subject: Reply with quote
labodhibo wrote:
stoney li wrote:
setup --> basic setup --> Optional Settings

Thanks! I was also looking for this.... anyways didn't work on R7000...
No internet connection. LAN is just fine. Disabled it. Will try in the next build Sad


Yep! Enabling HWNAT instantly kills my connection (on my R7000) so had to disable it! Smile
Back to top View user's profile Send private message
jsmiddleton4
DD-WRT User


Joined: 18 Mar 2007
Posts: 444
PostPosted: Sat Aug 16, 2014 13:36    Post subject: Reply with quote
Haven't tried this FW. Not going to. Am waiting for the Broadcom wireless drivers to catch up with DD-WRT.

It looks to me though that this FW needs to be pulled.
_________________
Jim
Netgear R7000
Kong's 24800M OC to 1200,800
Previously:
Asus RT-N66U
Linksys E3000
Linksys WRT54GS Version 2.1
Buffalo WHR-HP-G54
Linksys WRT54G Version 1.1
Back to top View user's profile Send private message
jasonkruys
DD-WRT User


Joined: 13 Dec 2013
Posts: 90
PostPosted: Sat Aug 16, 2014 14:58    Post subject: Reply with quote
SimonB79 wrote:
labodhibo wrote:
stoney li wrote:
setup --> basic setup --> Optional Settings

Thanks! I was also looking for this.... anyways didn't work on R7000...
No internet connection. LAN is just fine. Disabled it. Will try in the next build Sad


Yep! Enabling HWNAT instantly kills my connection (on my R7000) so had to disable it! Smile


Fix noted in another thread. You need to clear the tables - iptables -t raw -F

You'll then be good to go.
Back to top View user's profile Send private message
Goto page 1, 2, 3, 4, 5, 6, 7  Next Display posts from previous:    Page 1 of 7
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum