Thanks for your interest.
- I build in windows and my firmware is Japan firmware.
- I have tried with tftp but it is unsuccessful
- yes, i can get into the web gui.
- i am trying to do this with Lan cable and my computer not wireless.
Thank you so much.
You might try flashing the us version over your japan version first....try the 26138 build of firmware-us.bin file.
Make sure you do a 30/30/30 reset on it before trying to flash back to whr300hp2d-v24sp2-22750b.
If this doesn't work...I'm not sure how to fix it. I've always been able to flash the whr300hp2d-v24sp2-22750b file from any of the dd-wrt firmwares. Actually...I haven't been able to update from a firmware-us.bin file to another build of firmware-us.bin file....I have to always go back to whr300hp2d-v24sp2-22750b first...then update to a new version of firmware-us.bin
redhawk
Thank you so much. I flashed it sucessfull.
Have a good day !
2 - flash the OEM build whr300hp2d-v24sp2-22750b.bin file.
3 - hard reset 30/30/30. (optional)
4 - connect to the router using encryption credentials on the router sticker.
Am I right that this is an upgrade path from an older dd-wrt to a newer dd-wrt, rather than from Buffalo's branded dd-wrt? If so, how can get up to the point from the branded firmware where I can apply these steps? I tried following the steps, but I don't have a working non-OEM dd-wrt nvram to restore to.
I don't have any problem back reving to the Buffalo build and making that work, but I can't get the non-branded dd-wrt WAN port to work propertly.