[netting]

Build 2500M (Kong) Router Netgear R700. I have been able to fix everything but the drops error I receive on VLAN2. The only thing on vlan2 is my guest network. I have received this error in all the builds I have attempted. Completed numerous 30/30/30 resets.

Tired this set up. http://tips.desipro.de/2013/12/06/guest-wifi-setup-dd-wrt/

Currently have this set up. http://www.dd-wrt.com/wiki/index.php/OpenVPN_on_Dedicated_Wireless_Access_Point_%28VAP%29

Thanks for any assistance you can provide.

vlan2 Link encap:Ethernet HWaddr E4:F4:C6:0B:F8:A9
inet addr:199.188.xx.71 Bcast:199.188.xx.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:77207 errors:0 dropped:9723 overruns:0 frame:0
TX packets:59540 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:61596235 (58.7 MiB) TX bytes:30298043 (28.8 MiB

[Per Yngve Berg]

vlan2 is the wan port. You cannot have guest lan there.
The packets reported dropped is probably dropped by the firewall.

It can also be caused by a bad cable connected to the port. For a Gigabit connection, all 8 wires is used.