The problem is that my xbox 360 make a test from the NAT. that Nat need to be OPEN, but when it make the test the NAt is strict and cant play online matches or even talk to friends online.
I changed to Access Point with wired input to see if this change but still the same. I think im going to upgrade to RC 6.2 to see what happens.
BTW how i can downgrade to v23 ?
Joined: 15 Feb 2008 Posts: 221 Location: Ontario Canada
Posted: Sat Feb 16, 2008 14:45 Post subject:
Tornado wrote:
@shoaibbhatti
Just remember, I modified the V3 Killer and reversions to self reboot on certain steps, powering off or unplugging at the wrong time could cause big problems.
Hi thanks for your help so far:)
So when using the new v3 killer there is no need to power off after flashing the v3 killer, just wait until it reboots on it's own about 2 minutes, then tftp the dd-wrt file to the router, then wait 2 more minutes?
Joined: 07 Jun 2006 Posts: 2087 Location: Odessa, Ukraine
Posted: Sat Feb 16, 2008 16:44 Post subject:
@biggy boy
This is what happens
When you flash Killer V3 thru the web gui, it writes the small firmware program to flash, then it reboots itself.
When it reboots, it begins executing the program that was just flashed to it, takes probably a min, wiat for "TWO"
if it has not rebooted itself after TWO minutes, you can manually reboot it, it shouls be finished doing what has to be done.
after it reboots the third time, the CFE will write new nvram params, from those embedded in the CFE, now it needs to reboot one more time, it should do this itself, and should be very fast.
If you are watching, and it boots up and all lights go off, including the power light, your ready to tftp the firmware, "DD-WRT" firmware, not Linksys Firmware. _________________ Want JTAG support - Donate a router
or Donate with PayPal !
im not sure what to do in the begining of this tutorial i read about the bricked an what i should get but i think im bricked also because my lights are weird but i can ping i can upgrade my firmware but i cant log into it via web browser whats going on?
Joined: 07 Jun 2006 Posts: 2087 Location: Odessa, Ukraine
Posted: Tue Feb 19, 2008 6:04 Post subject:
@marcus,
What router do you have ? what do you mean your lights are wierd ? is the power light on or off ? _________________ Want JTAG support - Donate a router
or Donate with PayPal !
i got to lookin at my router after i posted the message (Linksys WRT54GS v7) and its exactly the same as the other guy i get a dim power light and all my lan lights work but i can ping my router and upgrade firmware with the linksys utility but can log into it by the internet. Hope this helps
Joined: 07 Jun 2006 Posts: 2087 Location: Odessa, Ukraine
Posted: Tue Feb 19, 2008 19:49 Post subject:
You are flashing dd-wrt firmware correct ? If you are, and its not working properly, tftp the killer V3 only for the GS, It will reboot itself, then it takes about a min, before it will be finished flashing, then you can try tftping the dd-wrt firmware again. _________________ Want JTAG support - Donate a router
or Donate with PayPal !
ok i have been tryin to use the killer firmware and when i do that it goes through. after i get that to work the lights are the same as b4. but your saying once i get all that done i need to use the dd-wrt and then it will be fixed?
Joined: 07 Jun 2006 Posts: 2087 Location: Odessa, Ukraine
Posted: Wed Feb 20, 2008 5:55 Post subject:
Does the computer your using have a static address or one assigned by the dhcp server ? give your pc or the computer that you want to manage the router with a static address of 192.168.1.5, mask 255.255.255.0, plug into port one and then navigate to http://192.168.1.1
and or try pinging it ? _________________ Want JTAG support - Donate a router
or Donate with PayPal !