realdreams DD-WRT Novice
Joined: 23 Feb 2010 Posts: 45
|
Posted: Mon Nov 03, 2014 13:02 Post subject: RT3052 VLAN trunk on uplink for separate SSIDs |
|
Asus RT-N13U B1 v24-sp2 (10/29/14) std - build 25203
I use it as an AP, WAN port (uplink) used as LAN, connected to router (MikroTik). AP is being used as a layer 2 device (DHCP disabled)
I am trying to set up separate SSIDs for guest, production and testing, each in different VLANs. I want the DDWRT router to do nothing more than an AP and let the router handles everything else.
So far I haven't been able to find anything meaningful for VLAN functionality on ralink platform. I created a virtual wireless interface ra1 and put it into br1, assigning an ip address to br1. But br1 interface cannot populate mac address table. When I ping from AP, on the wireless client connected to ra1 I could see APR request and response, but DDWRT doesn't process the ARP response
root@DD-WRT AP:~# arp
? (192.168.208.44) at <incomplete> on br1
and interface counter does not work for ra1 (driver limitation?)
ra1 Link encap:Ethernet HWaddr 48:5B:39:FA:1D:D5
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
And I can't figure out how to designate a port as a 802.1Q trunk port for uplink.
It is so frustrating to read through stuff in ddwrt that's inconsistent (vlan0, vlan1, vlan2, eth2, eth5) in documentations. And why can't the documentation follow the convention of industry practice (bridge, vlan etc here means something totally different from Cisco, Juniper, VMware documentations...) |
|