Why is there no link posted in the regular
Downloads › others › eko › BrainSlayer-V24-preSP2 › 2014 folder accessible from the Router Database ? Last one is 25251.
Status: Working
Reset: Yes
Errors: None that I'm aware of.
PS: Using the DD-WRT iOS app v2.3 (daps-apps.com) I can no longer connect to the router. The app use to connect on firmware 11-03-2014-r25251 not sure what has caused the problem.
Router Model: TP-Link TL-WR841ND v8.2
Status: OK (Updated from r25251) / Used as AP only (terminates PPPoE WAN).
Reset: No
Errors: WLAN led is still off when no traffic
Last edited by understracker on Fri Nov 07, 2014 0:27; edited 2 times in total
HTTPs Web Access still not working.
In Services the 'ttraff Daemon' is ON by default.
The processing screen sometimes is endless (i thing must terminate when System led stops to blink).
Text Fields, Buttons is too big w/out shadows etc.
There's no technical documentation of the problem as of now. Change occured sometime between r21676 and r23503.
I'm running tests with the releases inbetween, and will report back soon.
EDIT:
Some corrections to my previous statements:
- Last working factory-to-ddwrt image: r21676
Any F2DDWRT image released after will result in the WAN not working problem
- Last working web update image: r23320
Any image released after will result in the WAN not working problem
Given that between r23320 and r23503 there are almost 200 changesets, it will take some time to go through them and check all code to see if any of that causes the issue.
It is really annoying that I cannot use the latest release of dd-wrt though!
There's no technical documentation of the problem as of now. Change occured sometime between r21676 and r23503.
I'm running tests with the releases inbetween, and will report back soon.
EDIT:
Some corrections to my previous statements:
- Last working factory-to-ddwrt image: r21676
Any F2DDWRT image released after will result in the WAN not working problem
- Last working web update image: r23320
Any image released after will result in the WAN not working problem
Given that between r23320 and r23503 there are almost 200 changesets, it will take some time to go through them and check all code to see if any of that causes the issue.
It is really annoying that I cannot use the latest release of dd-wrt though!
try erasing nvram on r25273 then rebooting after (without restoring an nvram backup) _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
HTTPs Web Access still not working.
In Services the 'ttraff Daemon' is ON by default.
The processing screen sometimes is endless (i thing must terminate when System led stops to blink).
Text Fields, Buttons is too big w/out shadows etc.
disable HTTP, enable HTTPS, apply settings and see what that does for you.
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Fri Nov 07, 2014 4:58 Post subject:
toastgodsupreme wrote:
iliteo wrote:
Router Model:TP-Link TL-WA801NDv1
Status: Working
Reset: Yes
Errors: minor
Updated from r25251.
HTTPs Web Access still not working.
In Services the 'ttraff Daemon' is ON by default.
The processing screen sometimes is endless (i thing must terminate when System led stops to blink).
Text Fields, Buttons is too big w/out shadows etc.
disable HTTP, enable HTTPS, apply settings and see what that does for you.
Router Model: Linksys E1550
Reset: no
Errors: Finally managed to make the wireless work.
It seems that the wireless on this router only works when the security is set to wpa or wpa2 (have not tested RADIUS). Don't work when it is on wep or disabled.
