Status: ok
Reset: no
Errors: see tickets below, applies to all my routers(so do the other tickets in my original post on page 1, this is just a wndr4300 specific ticket).
Router Model: TPLINK WR1043ND V2 (running as main AP)
Status: ok
Reset: no
ERRORS: Missing some wireless advanced settings (like antenna gain and power).
Router Model: TPLINK WR1043ND (running as wireless client in bridge mode)
Status: ok
Reset: no
ERRORS: Slow connection speed to the V2 in client bridge. Might be caused by lack of advanced wireless settings (antenna gain most likely).
NOTE: In both cases I had to install the firmware via a WiFi connected laptop. Any attempts to install the firmware using Ethernet failed. Previous firmware on both routers: r24461
I checked for other wlan stations on my channel, but I am the only one.
Anyone else experienced this issue? Perhaps smartphone has only one antenna?
see wireless settings link in sig, but also consider the client spec..1x1 @ ht40 = 150mbps, 2x2 @ ht40 = 300mbps, 3x3 @ ht40 = 450mbps _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Simply the router can't get real time over NTP. I set 2 NTP servers like in Windows (not M$), but time still be incorrect at all. Not because time zone shift, nothing going right.
As I understand it dd-wrt expects you to enter just one NTP server.
@topic:
Router Model: TP-Link TL-WR1043ND v2
Status: OK
Reset: Yes
Errors: Didn't want to flash over GUI, if someone have same problem i suggest flashing it over Telnet, which is easy and fast. Basic functions as QoS, WiFi are working.
Probably a problem with the previous version of dd-wrt you were using.
Simply the router can't get real time over NTP. I set 2 NTP servers like in Windows (not M$), but time still be incorrect at all. Not because time zone shift, nothing going right.
As I understand it dd-wrt expects you to enter just one NTP server.
Thank you. I used some NTP servers from USA by copy it's names from server list in Windows, other than M$ own server. In other router with same version FW and ISP connection over PPPoE, the time was set automatically in few seconds. It was a source of my question: the same DD-WRT version in same environment got time value over PPPoE and never got over DHCP connection to ISP. I tried use 3-4 NTP servers without any success.
Hi Tatsuya46 it seems as though build 23507 is an important build for those of us who wish to control txpower and antenna gain on some routers. Would you be so kind as to have it uploaded on the ftp? as seen here:
Changeset 25307
View differences
Show lines around each change
Show the changes in full context
Ignore:
Blank lines
Case changes
White space changes
5GHz radio doesn't broadcast, the Web GUI says otherwise, but the blue indicator light for 5Ghz isn't lit, and isn't picked up by any wireless devices.
Interestingly, if I disable the 5Ghz radio and apply the settings the indicator light becomes lit, but its still not there. _________________ James
Main router:
Netgear R7000 overclocked to 1.2GHz - DD-WRT v3.0-r35965M kongac
IPv6 6in4 (HE.net), OpenVPN (with PBR and split tunnelling), Entware, dnsmasq with ipset
Hi Tatsuya46 it seems as though build 23507 is an important build for those of us who wish to control txpower and antenna gain on some routers. Would you be so kind as to have it uploaded on the ftp? as seen here:
Changeset 25307
View differences
Show lines around each change
Show the changes in full context
Ignore:
Blank lines
Case changes
White space changes
i dont upload them, the ftp private test builds are on a different nightly ftp not to be given out without permission. according to kong bs is doing faster releases for now as hes working towards the next stable ddwrt release _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Hi Tatsuya46 it seems as though build 23507 is an important build for those of us who wish to control txpower and antenna gain on some routers. Would you be so kind as to have it uploaded on the ftp? as seen here:
Changeset 25307
View differences
Show lines around each change
Show the changes in full context
Ignore:
Blank lines
Case changes
White space changes
i dont upload them, the ftp private test builds are on a different nightly ftp not to be given out without permission. according to kong bs is doing faster releases for now as hes working towards the next stable ddwrt release
I understand and apologise for rushing to that conclusion. ^_^