Yes, iliteo, please show us a snapshot with Physical ath0 (Client) and Virtual ath0.1 (AP), on the same 2.4GHz band, both @ 40 MHz and 300 Mb/s. I'd really like to see that, since all I get is ath0 @300 Mb/s, but ath0.1 only @144 Mb/s.
I don't achieve this situation KrypteX.
That's i'm talking about. Just wondering why in stock firm we achieve full 300 Mb/s in both directions and with dd-wrt in the send direction only the half.
This indicate for sure that it's not hardware limitation.
And i don't speak for the true speed.
*I use the latest build.
Anyway i make a question in http://www.dd-wrt.com/phpBB2/viewtopic.php?p=933474#933474
we are OFT here, and thank you.
Hope we find a logical answer.
Has there been an issue posted on the issue tracker regarding the USB storage not working?
I posted here in the forum an issue with my WNR2200:
no power on the USB port, so no storage working.
Older build works.
I just updated to the version of November 11th and thought it solved my FTP to USB problem described at http://www.dd-wrt.com/phpBB2/viewtopic.php?t=276331 but unfortunately I did not look right. After I noticed a spontaneous reboot of my 4300 I noticed the FTP was directing to the routers internal memory and not the USB. The USB does not get powered in the latest firmware version, like described above.
Can you tell me what version did gave power on the USB port. I tried "131103 - Build r25251" and "141107 - Build r25279" but neither one gave power to the USB.
Yes, iliteo, please show us a snapshot with Physical ath0 (Client) and Virtual ath0.1 (AP), on the same 2.4GHz band, both @ 40 MHz and 300 Mb/s. I'd really like to see that, since all I get is ath0 @300 Mb/s, but ath0.1 only @144 Mb/s.
vap never show more than 144.444 on any version of dd-wrt status page but on my WNDR3700v2 they are really working at 300 and always have been with every version of dd-wrt I've ever used.
Last edited by bdg2 on Wed Nov 19, 2014 19:58; edited 1 time in total
using ap or wds ap + vap is fine, the problem is in any type of client mode for wan connection, if u say u still dont have this problem with ur wndr3700 v2 then please give screenshots so my jaw can be on the floor _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Joined: 04 Nov 2012 Posts: 525 Location: Acapulco, Mexico
Posted: Wed Nov 19, 2014 2:19 Post subject:
tatsuya46 wrote:
using ap or wds ap + vap is fine, the problem is in any type of client mode for wan connection, if u say u still dont have this problem with ur wndr3700 v2 then please give screenshots so my jaw can be on the floor
We won't see your jaw on the floor neither screenshots
So now all the sudden stock FW its a marvel _________________ TP-Link: TL-WR741ND V4
TP-Link: TL-WR842ND V2
thanks for the reply. I went ahead and gave it a shot. once flashed this build behaves much like any build after 6-23-14 build in that as soon as I click Services/USB and http://192.168.1.1/USB.asp trys to load the router starts freaking out and all though it keeps connectivity to the internet it wont display the ddwrt webpage until I cold boot the router. previously I though the router was rebooting but that's not the case, it does however freak the router out.
using ap or wds ap + vap is fine, the problem is in any type of client mode for wan connection, if u say u still dont have this problem with ur wndr3700 v2 then please give screenshots so my jaw can be on the floor
Please can you explain in words what you are doing.
It's probably me being stupid but "client mode for wan connection" means nothing to me.
Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Wed Nov 19, 2014 21:09 Post subject:
Acumen wrote:
clweb wrote:
vortex05 wrote:
Has there been an issue posted on the issue tracker regarding the USB storage not working?
I posted here in the forum an issue with my WNR2200:
no power on the USB port, so no storage working.
Older build works.
I just updated to the version of November 11th and thought it solved my FTP to USB problem described at http://www.dd-wrt.com/phpBB2/viewtopic.php?t=276331 but unfortunately I did not look right. After I noticed a spontaneous reboot of my 4300 I noticed the FTP was directing to the routers internal memory and not the USB. The USB does not get powered in the latest firmware version, like described above.
Can you tell me what version did gave power on the USB port. I tried "131103 - Build r25251" and "141107 - Build r25279" but neither one gave power to the USB.
Maybe it is unit specific problem. I just checked again it is working for me...