Posted: Sat Nov 15, 2014 2:22 Post subject: Buffalo WHR-300HP2 Wireless Status
Router: Buffalo WHR-300HP2
Build: 22761 and 24461
On the Status>Wireless page, the Clients list under the Wireless Nodes is not accurate. The first listing is accurate showing the correct MAC address, signal strength, etc. However, the 2nd and subsequent items in the list are not accurate. The MAC address has the format 00:00:00:xx:xx:00 and the signal strength always shows 100%.
The problem only seems to affect the status page. The actual connection seems to function properly.
Also, when operating in WDS mode with multiple WHR-300HP2's, the WDS works properly, but none of the WDS clients appear on the status page.
Are these problems inherent to Ralink chipsets or is there some setting to correct these problems.
Joined: 17 Jun 2009 Posts: 58 Location: Fremont, CA.
Posted: Wed Jan 27, 2016 22:59 Post subject:
Count me in too!
I tested it and is functioning properly but it is not reporting it correctly. The MAC address has the format 00:00:00:xx:xx:00, the Tx & Rx always show 1.0, and the signal strength always shows 100%. _________________ DD-WRT is Awesome!
WZR1750DHP 31160 @1000 5 GHz Main AP AC
WZR1750DHP 31160 @1000 5 GHz CB AC
WZR1750DHP 31160 @1000 2.4 GHz WAP N-Only