Posted: Fri Dec 12, 2014 4:36 Post subject: need help,dir-615 g2 keep revert stock fw after reboot
I heve flashed my dir-615 g2 to ddwrt r19519 and it all working well but everytime i power off or reboot router it keep revert to d-link stock firmware,is tat anything wrong with my router?
That doesn’t seem possible. Once you update to dd-wrt firmware, the prior firmware is lost and would require reinstallation, by YOU. A mere reboot isn’t going to make the old firmware reappear. So your description doesn’t jive w/ how the firmware update process actually works.
I flashed my router use emergency rom update
Set my pc ip to 192.168.0.50
Power off my router
Press reset button for 5 sec.then power on my router without release and wait 10sec.till then power icon led blinking
Plug in my lan cable to the wan port of my router
Open address 192.168.0.1 with ie
Choose the firmware to update
All done n boot into ddwrt,doing factory reset then it will revert back to d-link stock fitmware
Nvm,i flash again,when reach step factory reset happen again
Blur with whay happen to my router,hope got solution from here
Thanks for advance