Access Restrictions and Double NAT

Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions
Author Message
sudheeshb
DD-WRT Novice


Joined: 04 Aug 2018
Posts: 39

PostPosted: Thu Sep 06, 2018 19:05    Post subject: Access Restrictions and Double NAT Reply with quote
Hello,

I have added one more router ( LinkSys with Stock firmware ) in my network. This is because the DD-WRT router is not working with Security Cameras (Details here https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316540 ).

Now I have (DD-WRT LinkSys ACS1900) -> (LinkSys with Stock firmware).

Camera is connected to LinkSysn with Stock firmware and camera works fine. The number is device is set as one for this router so that only camera can connect to this. The IP address is used for camera 192.168.1.251.

All other devices are connected to DD-WRT router ( except camera )

I have set the access restrictions ( do not allow some device to connect to internet between 10pm to 6pm ). The access restrictions is not working with this double router setup. ( It used to work earlier ).

Any suggestions to solve this issue?
Sponsor
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2029

PostPosted: Thu Sep 06, 2018 20:23    Post subject: Reply with quote
Probably be nice to know what build DD-WRT you are using. Not mentioned in either post. Also access restrictions won't work if device is already connected at 10 PM. Could that be the problem?
_________________
Forum Guide Lines (with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips!)
How to get help the right way

Before asking for help - Read the forum guidelines AND Upgrade DD-WRT!
Adblock by eibgrad + Blocklist Collection
sudheeshb
DD-WRT Novice


Joined: 04 Aug 2018
Posts: 39

PostPosted: Thu Sep 06, 2018 21:40    Post subject: Reply with quote
I am using the firmware ( ddwrt-linksys-wrt1900acv2-webflash.bin ) dated 2018-8-22. (v3.0 Beta Build 36698 ). This is the latest one as per https://dd-wrt.com/support/router-database/.

The issue that I am facing now, if enable the access restrictions the internet is not available for these devices for the entire day. It used to work with only single router combination.

Or if you can provide a solution how to make the camera work with DD-WRT routers that is also welcome. I never got any response to this question ( https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316540 ) hence I am using one more router with stock firmware.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6410
Location: UK, London, just across the river..

PostPosted: Fri Sep 07, 2018 9:22    Post subject: Reply with quote
wrong forum wrt1900acv2 is Marvell MVEBU based Hardware
try posting there https://forum.dd-wrt.com/phpBB2/viewforum.php?f=58

otherwise do not rely on access restriction very much my not work on this build you have look at track reports or ask in Marvell forum for more details how to ...!!

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2029

PostPosted: Fri Sep 07, 2018 13:53    Post subject: Reply with quote
Alozaros wrote:
wrong forum wrt1900acv2 is Marvell MVEBU based Hardware
try posting there https://forum.dd-wrt.com/phpBB2/viewforum.php?f=58

otherwise do not rely on access restriction very much my not work on this build you have look at track reports or ask in Marvell forum for more details how to ...!!


OP did post part of this in Marvell and got reply from spuriousoffspring.
As stated VAPs are partially broken some devices some builds.
As far as access restrictions I find it a little confusing to get set up with having to create 2 policies that get thru one day to the next with different times and/or devices and save and apply and all that.
Point being to double check that you have all that as it should be.

_________________
Forum Guide Lines (with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips!)
How to get help the right way

Before asking for help - Read the forum guidelines AND Upgrade DD-WRT!
Adblock by eibgrad + Blocklist Collection
sudheeshb
DD-WRT Novice


Joined: 04 Aug 2018
Posts: 39

PostPosted: Fri Sep 07, 2018 16:23    Post subject: Reply with quote
I got a reply for my original problem from spuriousoffspring. If that solution works, I don't need two router. I will follow up there. Thanks!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum