E3200 Antenna Mod help !

Post new topic   Reply to topic    DD-WRT Forum Index -> Hardware DIY / Hardware Mods
Author Message
wild05kid05
DD-WRT Novice


Joined: 16 Feb 2012
Posts: 3

PostPosted: Sat Feb 18, 2012 0:49    Post subject: E3200 Antenna Mod help ! Reply with quote
I will be modding some external antennas using IP/ u.fl to RP-SMA Female bulkhead

and 3 3dBi 5Ghz antennas and some for the 2.4 band. But I discovered something weird, and hope you guys can clarify it for me.



You can see all the grey wires are "soldered" and there are two sockets empty ahead of it. Now I have no clue what it is, the other 3 black wires I can replace and mod.
Sponsor
Dark_Shadow
DD-WRT Guru


Joined: 31 Aug 2009
Posts: 2448
Location: Third Rock from the Sun

PostPosted: Sat Feb 18, 2012 1:46    Post subject: Reply with quote
Those are manufacturer test connectors, you can't do anything with them. The only wat to put external antennas on the 2.4GHz radio is to solder in the pigtails.
_________________
Peacock Thread-FAQ -- dd-wrt Wiki

Testing Multiple Routers -- Bootloader Collection Project -- My Wiki
wild05kid05
DD-WRT Novice


Joined: 16 Feb 2012
Posts: 3

PostPosted: Sat Feb 18, 2012 5:05    Post subject: Reply with quote
Thank you for the response, I guess I will mod the 5ghz band then, along with some cooling mod
wild05kid05
DD-WRT Novice


Joined: 16 Feb 2012
Posts: 3

PostPosted: Fri Feb 24, 2012 19:24    Post subject: more help ! :/ Reply with quote
Hi guys again, so I got all the supplies, drilled the holes and plugged it in, I got poorer range + speed (never reached 300 Mpbs)

Here are the supplies I got:
http://www.ebay.com/itm/New-Dual-Band-2-4-5-8Ghz-6dBi-RP-SMA-High-Gain-Antenna-/140571809564?pt=LH_DefaultDomain_0&hash=item20babb971c#ht_4526wt_1128

and

http://www.ebay.com/itm/140580120886?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_1304wt_1128

Here are some photos:
http://www.flickr.com/photos/48433815@N08/6924889653/in/photostream/
I also added some passive aluminium heatsink

Is it the antennas I got or the cables cause the trouble guys ? Would you guys recommend me getting high end cisco antennas like this Cisco AIR-ANT5135D-R

Or any other antennas that would boost the 5Ghz band ? And by the way, all Cisco antennas use RP TNC, can I just keep the cables I got (u.fl to RP SMA) and use an adapter (RP SMA to RP TNC) together, would that cause performance loss ? Thanks in advance !
ex3r
DD-WRT Novice


Joined: 21 Jan 2010
Posts: 33

PostPosted: Fri Mar 02, 2012 19:18    Post subject: Reply with quote
May i ask which version of DD-WRT firmwares did use to flash your router. Thanks.
MrFidget
DD-WRT User


Joined: 15 Jul 2010
Posts: 378

PostPosted: Sun Jun 17, 2012 13:07    Post subject: Reply with quote
Where is this up to ? I have a few I may need to extend the 2.4GHz range.

BTW, The firmware version is important as it addresses some Wifi issues that are with 17201

Cheers
Chris
alyzar
DD-WRT Novice


Joined: 09 Jan 2015
Posts: 1

PostPosted: Fri Jan 09, 2015 22:41    Post subject: E3200 Antenna Mod help Reply with quote
I know this is an old post (searched) but i have a nb question. Right now I am connecting to cablewifi via E3200 in repeater mode with a signal strength around 27 but drops below 20 at times. My question is will the external antenna mods help increase the signal strength if i choose the non solder type antennas? Im confussed about the 5ghz or 2.4ghz mods.

E3200
DD-WRT v24-sp2 (03/25/13) mini

Thanks
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Hardware DIY / Hardware Mods All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum