Router: TP Link Archer C7 V2
Firmware: 03-19-2015-r26490
Status: Working
Reset: Yes
Errors: Very poor WiFi range (<3m), adjusting the TX power to 70 for both the 2.4ghz and 5ghz made no difference.
Previous: Stock
Posted: Tue Mar 24, 2015 22:13 Post subject: web-gui httpd crashed after enable https?
Router Model: TP-Link TL-WDR4900 (V1.3)
Status: OK
Reset: After the update. Hardware reset button not working. Enabled soft reset in the update menu.
https web-gui problem: When https enabled the Web-Interface might be unreachable.
- To get access to web-gui again: connect via telnet or ssh
- Type in: httpd -h /www
- Reconnect to web interface with http://
- Check that only the http option is enabled, not https. In Administration -> Management -> Web Access -> Protocol
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Tue Mar 24, 2015 22:46 Post subject: Re: web-gui httpd crashed after enable https?
Inno_A_Santana wrote:
Router Model: TP-Link TL-WDR4900 (V1.3)
Status: OK
Reset: After the update. Hardware reset button not working. Enabled soft reset in the update menu.
https web-gui problem: When https enabled the Web-Interface might be unreachable.
- To get access to web-gui again: connect via telnet or ssh
- Type in: httpd -h /www
- Reconnect to web interface with http://
- Check that only the http option is enabled, not https. In Administration -> Management -> Web Access -> Protocol
Note: Not much more testing than initial flash done yet. _________________ reenignE esreveR
Resistance is NOT futile... It's Voltage divided by Current!
Assumptions:
1. Everyone on the forum has read the relevant forum section announcements.
2. For Broadcom section we have ALL at least tried to understand the "Peacock" thread,HERE
Router: TP Link Archer C7 V2
Firmware: 03-19-2015-r26490
Status: Working
Reset: Yes
Errors: Very poor WiFi range (<3m), adjusting the TX power to 70 for both the 2.4ghz and 5ghz made no difference.
Previous: Stock
Posted: Wed Mar 25, 2015 14:03 Post subject: Re: web-gui httpd crashed after enable https?
tatsuya46 wrote:
Inno_A_Santana wrote:
Router Model: TP-Link TL-WDR4900 (V1.3)
Status: OK
Reset: After the update. Hardware reset button not working. Enabled soft reset in the update menu.
https web-gui problem: When https enabled the Web-Interface might be unreachable.
- To get access to web-gui again: connect via telnet or ssh
- Type in: httpd -h /www
- Reconnect to web interface with http://
- Check that only the http option is enabled, not https. In Administration -> Management -> Web Access -> Protocol
it never worked in ddwrt
I am using https and is working well at least in my router works. _________________ Buffalo WZR-HP-AG300H | TPLINK ARCHER-C7 v2
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Wed Mar 25, 2015 16:32 Post subject: Re: web-gui httpd crashed after enable https?
fingerslip wrote:
tatsuya46 wrote:
Inno_A_Santana wrote:
Router Model: TP-Link TL-WDR4900 (V1.3)
Status: OK
Reset: After the update. Hardware reset button not working. Enabled soft reset in the update menu.
https web-gui problem: When https enabled the Web-Interface might be unreachable.
- To get access to web-gui again: connect via telnet or ssh
- Type in: httpd -h /www
- Reconnect to web interface with http://
- Check that only the http option is enabled, not https. In Administration -> Management -> Web Access -> Protocol
it never worked in ddwrt
I am using https and is working well at least in my router works.
Bricked - had to flash via 30-30-30 reset with recovery image.
Ask tatsuya46 how he managed to do it without bricking, he has the same DIR-825 B1... _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Router: TP Link Archer C7 V2
Firmware: 03-19-2015-r26490
Status: Working
Reset: Yes
Errors: Very poor WiFi range (<3m), adjusting the TX power to 70 for both the 2.4ghz and 5ghz made no difference.
Previous: Stock
Odd all 4 of my archer c7v2 say otherwise .
Same for me, 4 working perfectly, covering a 7 story building.
Posted: Thu Mar 26, 2015 9:50 Post subject: Re: web-gui httpd crashed after enable https?
Inno_A_Santana wrote:
Router Model: TP-Link TL-WDR4900 (V1.3)
Status: OK
Reset: After the update. Hardware reset button not working. Enabled soft reset in the update menu.
https web-gui problem: When https enabled the Web-Interface might be unreachable.
- To get access to web-gui again: connect via telnet or ssh
- Type in: httpd -h /www
- Reconnect to web interface with http://
- Check that only the http option is enabled, not https. In Administration -> Management -> Web Access -> Protocol
Router Model: TP-Link TL-WDR4900 (V1.3)
Status: OK
Reset: NO
I have same problem with web-interface. Non secure version is running fine, but secure version has some problems. In dmesg, I can see this error:
Code:
<6>[ 177.144487] httpd[1957]: unhandled signal 11 at 00000000 nip 00000000 lr b795c358 code 30001
It appears there only at the time, when I tried to reach https version of web-interface.
Interesting thing is, that chrome is causing crashes of httpd on every attempt, but firefox is able to handle few requests (I can see 2 tabs in configuration for example), but then it will crash anyway.
Last working version which worked was r23919.
Non working version are : r26424 and r26490
Didn't had a time to do the reset of configuration, if anyone will have a idea how to fix this without reseting conf, it would be great.
.