umount /dev/scsi/host0/bus0/target0/lun0/part1
mount /dev/scsi/host0/bus0/target0/lun0/part1 /jffs
ok jffs mount with FAT16 only... ext2 and ext3 not mount !
mkdir /jffs/opt
mount -o bind /jffs/opt /opt
Code:
root@DD-WRT:~# sh /tmp/optware-install.sh
Checking system config ...
Using 210.247.16.1 as default gateway.
Using the following nameserver(s):
nameserver 192.168.1.1
Warning: /opt partition not empty!
Installing package uclibc-opt_0.9.28-13_mipsel.ipk ...
Connecting to ipkg.nslu2-linux.org (140.211.167.169:80)
Updating /opt/etc/ld.so.cache
/opt/sbin/ldconfig: can't link /opt/lib/libipkg.so.0 to libipkg.so.0.0.0: Operat
ion not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libpthread.so.0 to libpthread-0.9.28.so:
Operation not permitted
/opt/sbin/ldconfig: can't link /opt/lib/librt.so.0 to librt-0.9.28.so: Operation
not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libnsl.so.0 to libnsl-0.9.28.so: Operati
on not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libc.so.0 to libuClibc-0.9.28.so: Operat
ion not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libintl.so.0 to libintl-0.9.28.so: Opera
tion not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libmudflap.so.0 to libmudflap.so.0.0.0:
Operation not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libstdc++.so.6 to libstdc++.so.6.0.8: Op
eration not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libcrypt.so.0 to libcrypt-0.9.28.so: Ope
ration not permitted
/opt/sbin/ldconfig: can't link /opt/lib/ld-uClibc.so.0 to ld-uClibc-0.9.28.so: O
peration not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libm.so.0 to libm-0.9.28.so: Operation n
ot permitted
/opt/sbin/ldconfig: can't link /opt/lib/libthread_db.so.1 to libthread_db-0.9.28
.so: Operation not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libresolv.so.0 to libresolv-0.9.28.so: O
peration not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libmudflapth.so.0 to libmudflapth.so.0.0
.0: Operation not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libdl.so.0 to libdl-0.9.28.so: Operation
not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libutil.so.0 to libutil-0.9.28.so: Opera
tion not permitted
Installing package ipkg-opt_0.99.163-9_mipsel.ipk ...
Connecting to ipkg.nslu2-linux.org (140.211.167.169:80)
/opt/sbin/ldconfig: can't link /opt/lib/libipkg.so.0 to libipkg.so.0.0.0: Operat
ion not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libpthread.so.0 to libpthread-0.9.28.so:
Operation not permitted
/opt/sbin/ldconfig: can't link /opt/lib/librt.so.0 to librt-0.9.28.so: Operation
not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libnsl.so.0 to libnsl-0.9.28.so: Operati
on not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libc.so.0 to libuClibc-0.9.28.so: Operat
ion not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libintl.so.0 to libintl-0.9.28.so: Opera
tion not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libmudflap.so.0 to libmudflap.so.0.0.0:
Operation not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libstdc++.so.6 to libstdc++.so.6.0.8: Op
eration not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libcrypt.so.0 to libcrypt-0.9.28.so: Ope
ration not permitted
/opt/sbin/ldconfig: can't link /opt/lib/ld-uClibc.so.0 to ld-uClibc-0.9.28.so: O
peration not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libm.so.0 to libm-0.9.28.so: Operation n
ot permitted
/opt/sbin/ldconfig: can't link /opt/lib/libthread_db.so.1 to libthread_db-0.9.28
.so: Operation not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libresolv.so.0 to libresolv-0.9.28.so: O
peration not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libmudflapth.so.0 to libmudflapth.so.0.0
.0: Operation not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libdl.so.0 to libdl-0.9.28.so: Operation
not permitted
/opt/sbin/ldconfig: can't link /opt/lib/libutil.so.0 to libutil-0.9.28.so: Opera
tion not permitted
/tmp/optware-install.sh: line 91: /opt/bin/ipkg: not found
/tmp/optware-install.sh: line 92: /opt/bin/ipkg: not found
/tmp/optware-install.sh: line 93: /opt/bin/ipkg: not found
root@DD-WRT:~#
My USB device needs it when using kernel 2.4. It should be enough with the other module but it just don't seem to do the job by itself.
more information:
http://ftdi-usb-sio.sourceforge.net/#1
Thank you for all your help! If you would make a script for auto mounting hdd that would have been really nice! What I'm dreaming of is a all included mega usb build with all goodies that is usable for ppl like me with 8MiB routers.
Feb 27 21:19:41 kernel: usbserial.c: USB Serial support registered for FTDI SIO
Feb 27 21:19:41 kernel: usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
kernel: usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
kernel: usbserial.c: FTDI FT232BM Compatible converter detected
kernel: usbserial.c: FTDI FT232BM Compatible converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
kernel: usbserial.c: USB Serial support registered for FTDI FT2232C Compatible
kernel: usbserial.c: USB Serial support registered for FTDI FT232R Compatible
kernel: usbserial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
kernel: usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
kernel: ftdi_sio.c: v1.3.5r1:USB FTDI Serial Converters Driver
for someone who would like to get a better experience in usb printer support using p910nd, please use the attached binary instead of that old version 0.7-1 which ipkg installed from that old openwrt package repository.
p910nd.zip
Description:
v 0.91 of p910nd. works fine with present canon pixma ip1xxx printers.