ciscodlink DD-WRT User
Joined: 13 May 2014 Posts: 274
|
Posted: Mon Sep 14, 2015 12:21 Post subject: WRT54GL v1.1 USB mod for Arduino connection |
|
Hello,
Before I get myself into this I want to make 100% sure that this is going to work. I already did many serial port mods on this WRT54GL series and I know it for a fact that is working but USB :///
With Serial it is possible (however then I would need another voltage regulator (12->3) or booster (3.3->5v):
http://blog.thelifeofkenneth.com/2010/09/hacking-wrt54gl-serial-port.html
In this mod guide it says that adding USB ports is possible:
http://wiki.openwrt.org/toh/linksys/wrt54g#adding_usb_ports
Here however it says that the WRT54GL is not supported:
http://www.dd-wrt.com/wiki/index.php/USB
If I try to install those usb kernel modules ipkg cannot find them:
http://wiki.openwrt.org/doc/howto/usb.essentials
And the last thing is, I cannot found the acm.ko (USB Modem support).
I want to build in an arduino into the wrtg (powering it from usb while having data connection as well).
If somebody already accomplished this and can confirm it is working please let me know!
Thanks!
Description: |
|
Filesize: |
8.05 KB |
Viewed: |
3241 Time(s) |
|
|
|